Stm32-camera
About the Stm32-camera PCB
Stm32-camera is an open source STM32 PCB design by ilkercosar, published on GitHub. It is a 2-layer board measuring 26 × 25 mm, with 30 components from 17 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the AMS1117-2.85, XC6206-2V8 and XC6206-1V2. By type, the board carries 14 capacitors, 7 resistors, 4 ICs, 3 connectors, 1 transistor and 1 crystal.
Main components on the Stm32-camera
Stm32-camera bill of materials (BOM)
30 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-2.85 | SOT-223-3_TabPin2 | U2 |
| 1 | XC6206-2V8 | SOT-23-3 | U3 |
| 1 | XC6206-1V2 | SOT-23-3 | U4 |
| 1 | IRLML6401 | SOT-23 | Q1 |
| 1 | Crystal_GND23 | Crystal_SMD_SeikoEpson_FA128-4Pin_2.0x1.6mm | Y1 |
| 1 | CODE | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_JAE_DX07S024WJ3R400 | J2 |
| 1 | ZF5S-26-03-T-WT | SAMTEC_ZF5S-26-03-T-WT | J4 |
| 2 | 7pF | C_0402_1005Metric | C1, C2 |
| 1 | 4.7uF | C_0402_1005Metric | C3 |
| 1 | 1uF | C_0402_1005Metric | C4 |
| 9 | 100nF | C_0402_1005Metric | C5, C6, C7, C8, C9, C10, C11, C12 +1 |
| 1 | 15pF | C_0402_1005Metric | C14 |
| 2 | 1M | R_0402_1005Metric | R1, R6 |
| 2 | 20R | R_0402_1005Metric | R2, R3 |
| 3 | 4.7K | R_0402_1005Metric | R4, R5, R7 |
Stm32-camera design files
The KiCad project lives in the ilkercosar/Hardware-Desing repository on GitHub; these links point at the commit this page was built from.
Stm32-camera: common questions
What microcontroller does the Stm32-camera use?
The Stm32-camera is built around the STM32F103C8Tx, from the STM32 family.
How big is the Stm32-camera PCB?
The Stm32-camera measures 26 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm32-camera?
30 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32-camera design files?
From the ilkercosar/Hardware-Desing repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stm32-camera design in my own project?
The repository has no license, so all rights stay with ilkercosar. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32-camera without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Hardware-Desing
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k