Xteink x3-backlight
IllyaChuhalo·xteink-x3-backlight
About the Xteink x3-backlight PCB
Xteink x3-backlight is an open source PCB design by IllyaChuhalo, published on GitHub under the MIT license. It is a 2-layer board measuring 60 × 18 mm, with 31 components from 22 distinct parts.
Other key parts include the IP5306 and SGL8022W. By type, the board carries 11 capacitors, 7 resistors, 4 diodes, 3 connectors, 2 ICs and 2 transistors.
From the project
An open-source, ultra-slim ($6.0\text{ mm}$), snap-on backlight and power ecosystem engineered specifically for the Xteink X3 E-Ink e-reader.
An open-source, ultra-slim ($6.0\text{ mm}$), snap-on backlight and power ecosystem engineered specifically for the Xteink X3 E-Ink e-reader.
Featuring magnetic docking, warm 2700K frontlight with stepless capacitive dimming, a built-in 2500 mAh battery (~50 hours runtime), pass-through e-reader charging, and direct USB 2.0 book library synchronization.
🧲 Ferromagnetic Docking & Self-Alignment: Employs a $\varnothing 54\text{ mm}$ ferromagnetic steel ring (matching the official metal adapter rings bundled with the Xteink X3) and dual neodymium guide magnets ($\varnothing 4 \times 1.5\text{…

Main components on the Xteink x3-backlight
Xteink x3-backlight bill of materials (BOM)
31 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IP5306 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U1 |
| 1 | SGL8022W | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | AO3400A | SOT-23 | Q1 |
| 1 | AO3401A | SOT-23 | Q2 |
| 1 | USB_C_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | POGO_4P | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | WIRE_PADS_5P | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | KILL_SW | SW_SPDT_CK_JS102011SAQN | SW2 |
| 1 | LED_25% | LED_Kingbright_APA1606_1.6x0.6mm_Horizontal | D1 |
| 1 | LED_50% | LED_Kingbright_APA1606_1.6x0.6mm_Horizontal | D2 |
| 1 | LED_75% | LED_Kingbright_APA1606_1.6x0.6mm_Horizontal | D3 |
| 1 | LED_100% | LED_Kingbright_APA1606_1.6x0.6mm_Horizontal | D4 |
| 1 | 1.0uH | L_Bourns-SRN4018 | L1 |
| 4 | 10uF | C_0805_2012Metric | C1, C2, C4, C5 |
| 4 | 0.1uF | C_0603_1608Metric | C3, C6, C9, C11 |
| 2 | 22uF | C_0805_2012Metric | C7, C8 |
| 1 | 15nF | C_0603_1608Metric | C10 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 47k | R_0603_1608Metric | R3 |
| 2 | 100k | R_0603_1608Metric | R7, R12 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100R | R_0603_1608Metric | R11 |
| 1 | 5.1R_0.5W | R_1206_3216Metric | R13 |
Xteink x3-backlight design files
The KiCad project lives in the IllyaChuhalo/xteink-x3-backlight repository on GitHub; these links point at the commit this page was built from.
Xteink x3-backlight: common questions
How big is the Xteink x3-backlight PCB?
The Xteink x3-backlight measures 60 × 18 mm, has 2 copper layers and is 1 mm thick.
How many components are on the Xteink x3-backlight?
31 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Xteink x3-backlight design files?
From the IllyaChuhalo/xteink-x3-backlight repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Xteink x3-backlight design in my own project?
Yes, under the terms of its MIT license, which IllyaChuhalo chose for the repository.