PCB-Name-Card

iloveadrenaline·PCB-Name-Card·PCB/Solder Name Plate.kicad_pcb

PCB-Name-Card layout, top view — open source board by iloveadrenaline

About the PCB-Name-Card

PCB-Name-Card is an open source PCB design by iloveadrenaline, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 60 mm, with 12 components from 7 distinct parts.

Other key parts include the ICM7555xP. By type, the board carries 5 resistors, 3 inductors, 1 IC, 1 battery holder, 1 switch and 1 capacitor.

From the project

A name card made for hackathons with a pcb and some components that is funded by #Solder ( More on that at the end) This is my 3rd time using KiCad , before this I made a macropad and a clock ( Check my repos for those) If you are just starting out this is a begginer friendly coo

A name card made for hackathons with a pcb and some components that is funded by #Solder ( More on that at the end) This is my 3rd time using KiCad , before this I made a macropad and a clock ( Check my repos for those) If you are just starting out this is a begginer friendly cool project , just give it a try .

PCB Name Card is a namecard made from a pcb that shows a short overview about me and that has blinking LEDS because why not? Timelapse link : https://lapse.hackclub.com/timelapse/6II9IPPDLHkS ## Features

PCB-Name-Card, from the project README
From the project README

Main components on the PCB-Name-Card

PCB-Name-Card bill of materials (BOM)

12 components, 7 distinct parts.

QtyPartRefs
1
ICM7555xP
U1
1
Battery_Cell
BT1
1
Button
SW1
3
LED
L1, L2, L3
1
10μF
C1
2
4.7kΩ
R1, R2
3
470Ω
R3, R4, R5

PCB-Name-Card design files

The KiCad project lives in the iloveadrenaline/PCB-Name-Card repository on GitHub; these links point at the commit this page was built from.

PCB-Name-Card: common questions

How big is the PCB-Name-Card?

The PCB-Name-Card measures 100 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB-Name-Card?

12 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB-Name-Card design files?

From the iloveadrenaline/PCB-Name-Card repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PCB-Name-Card design in my own project?

Yes, under the terms of its MIT license, which iloveadrenaline chose for the repository.