FlatAntPanel4x4 dual
About the FlatAntPanel4x4 dual PCB
FlatAntPanel4x4 dual is an open source PCB design by imagestream, published on GitHub under the MIT license. It is a 4-layer board measuring 186 × 226 mm, with 16 components from 4 distinct parts.
From the project
Kicad designs and libraries
FlatAntPanel4x4 dual bill of materials (BOM)
16 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | RFAngle | RF-Angle-100ohm | AA5, AA9, AA10, AA11, AA12, AA15 |
| 8 | Antenna | Patch_Inset_5.5_Linear_7.1dBi_100R | AE1, AE2, AE3, AE4, AE5, AE6, AE7, AE8 |
| 1 | Feed1 | Flat_Ant_Hole | Feed1 |
| 1 | NetTie_3_Tee | RF-T-50ohm | NT1 |
FlatAntPanel4x4 dual design files
The KiCad project lives in the imagestream/kicad repository on GitHub; these links point at the commit this page was built from.
FlatAntPanel4x4 dual: common questions
How big is the FlatAntPanel4x4 dual PCB?
The FlatAntPanel4x4 dual measures 186 × 226 mm, has 4 copper layers and is 1.2 mm thick.
How many components are on the FlatAntPanel4x4 dual?
16 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the FlatAntPanel4x4 dual design files?
From the imagestream/kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FlatAntPanel4x4 dual design in my own project?
Yes, under the terms of its MIT license, which imagestream chose for the repository.
More boards in kicad
AP2100-power proto
150 × 160 mm340 parts6LMIT1
Raspberry PiAP3100
186 × 226 mm181 parts4LMIT1
Raspberry PiAP3000
186 × 226 mm175 parts4LMIT1
Raspberry PiAP2000
108 × 110 mm147 parts4LMIT1
Raspberry PiAP3500
105 × 105 mm140 parts4LMIT1
Raspberry PiCM4IOv5
160 × 90 mm137 parts4LMIT1
Raspberry PiAP2100v4
160 × 90 mm137 parts4LMIT1
Hydroponics
110 × 100 mm81 parts2LMIT1
Adafruit PowerRelay Wing
50.8 × 22.9 mm25 partsMIT1
FlatAntPanel4x4
186 × 226 mm13 parts2LMIT1
FlatPanel4x4 tighter
186 × 226 mm13 parts2LMIT1