HardLabs

AP2000

imagestream·kicad·AP2000/AP2000.kicad_pcb

AP2000 PCB layout, top view — open source Raspberry Pi board by imagestream
Simulate this board

About the AP2000 PCB

AP2000 is an open source Raspberry Pi PCB design by imagestream, published on GitHub under the MIT license. It is a 4-layer board measuring 108 × 110 mm, with 147 components from 73 distinct parts.

Its main chip is the RaspberryPiCM4Hirose, from the Raspberry Pi family. Other key parts include the TPS23751PWPR, CH340N, ATECC608A-MAHDA, SN74LVC07AD and 74LVC1G07SE-7. By type, the board carries 52 capacitors, 41 resistors, 20 diodes, 10 ICs, 8 inductors and 6 connectors.

From the project

Kicad designs and libraries

These files have been created in prerelease version 6 of KiCAD. If Version 6 isn't released yet then to use them you will need to download a nightly build of KiCAD. NB Nightly builds my have issues so please check the issue tracker.

To generate proper SMT positioning file for JLCPCB use this script: ~/JLCKicadTools//jlckicadtools/generatejlcfiles.py -n AP3500 .

Main components on the AP2000

TPS23751PWPRCH340NATECC608A-MAHDASN74LVC07AD74LVC1G07SE-7TL431AIDBVRTPS563249DDCRHMHA2801AR2

AP2000 bill of materials (BOM)

147 components, 73 distinct parts.

QtyPartRefs
1
TPS23751PWPR
IC2
1
CH340N
U1
1
ATECC608A-MAHDA
U2
1
SN74LVC07AD
U3
1
74LVC1G07SE-7
U5
1
TL431AIDBVR
U6
3
TPS563249DDCR
U10, U11, U13
1
HMHA2801AR2
U12
1
FDS86242
Q1
2
USB_OTG
J1, J2
1
Boot
J3
1
0826-1X1T-GH-F
J9
1
Barrel_Jack
J11
1
-
Bus_PCI_Express_Mini
-
J12
2
RaspberryPiCM4Hirose
CM1, CM2
1
LightPipe
H5
4
HeatSink
H6, H7, H8, H9
1
SW_SPST
SW1
1
TSE265 / 7491195112
TR1
1
LED Red
D1
Show 53 more
QtyPartRefs
4
LED Green
D2, D3, D19, D20
9
B2100
D4, D5, D6, D7, D8, D10, D11, D12 +1
1
SMAJ58A
D9
1
DFLU1200-7
D14
1
SBR8A60P5-13
D15
2
MMSD4148T1G
D16, D18
1
BAT54S
D17
4
300 OHM
FB1, FB2, FB3, FB4
1
744042003
L1
2
VLS6045EX-1R5N
L2, L3
1
VLS6045EX-1R0N
L4
13
100n 50v
C1, C2, C3, C19, C23, C30, C39, C40 +5
4
1000p 100v
C4, C5, C6, C7
2
.1u 100v
C8, C27
1
2200pF 100v
C9
2
2.2u 100v
C10, C25
1
22u 100v
C11
12
22uF 16V
C12, C13, C14, C15, C31, C35, C50, C51 +4
2
100uF
C16, C17
2
1u 25v
C18, C36
1
100pF 50V
C26
1
-
2.2nF 2KV
C28
1
22u 25v
C29
1
.47u 16V
C32
1
330p 50v
C33
1
33n 25v
C34
6
10u 25v
C37, C47, C53, C54, C60, C61
1
.022u 50v
C38
6
1K 1%
R1, R6, R7, R10, R19, R22
2
470R
R2, R3
1
7.5 5% 1W
R4
1
4.99K 1%
R5
2
DNS 4.7K 1%
R8, R9
1
100K 1%
R11
1
4.42K 1%
R12
1
39K 1%
R13
1
24.9K 1%
R14
1
750K 1%
R15
1
-
20
R16
2
0R 1%
R17, R61
1
63.4 1%
R18
2
4.7K
R20, R57
5
10K 1%
R21, R26, R30, R33, R38
1
34K 1%
R23
3
2K 1%
R24, R25, R34
1
332 1%
R27
1
73.2K 1%
R28
1
10 1%
R29
1
.082 1%
R31
1
45.3K 1%
R32
1
2.61K 1%
R35
1
15K 1%
R37
2
2.2K
R40, R41

AP2000 design files

The KiCad project lives in the imagestream/kicad repository on GitHub; these links point at the commit this page was built from.

AP2000: common questions

What microcontroller does the AP2000 use?

The AP2000 is built around the RaspberryPiCM4Hirose, from the Raspberry Pi family.

How big is the AP2000 PCB?

The AP2000 measures 108 × 110 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the AP2000?

147 components, from 73 distinct parts. The full bill of materials is listed on this page.

Where can I download the AP2000 design files?

From the imagestream/kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the AP2000 design in my own project?

Yes, under the terms of its MIT license, which imagestream chose for the repository.

Can I test firmware for the AP2000 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in kicad

Similar boards