Getting to blinky

ImSeanConroy·getting-to-blinky

Getting to blinky PCB layout, top view — open source board by ImSeanConroy

About the Getting to blinky PCB

Getting to blinky is an open source PCB design by ImSeanConroy, published on GitHub under the MIT license. It is a 2-layer board measuring 34.5 × 30.5 mm, with 7 components from 6 distinct parts.

Other key parts include the 7555. By type, the board carries 3 resistors, 1 IC, 1 battery holder, 1 diode and 1 capacitor.

From the project

Complete design files for a 7555 timer–based LED blinking PCB, built with SMD components, and created using KiCad.

Complete design files for a 7555 timer–based LED blinking PCB, built with SMD components, and created using KiCad.

1. Open the Project - Open the .kicadpro file in KiCad to view the project. 2. Review the Design - Inspect the schematic and PCB layout to ensure it meets your needs. 3. Customize or Export - Make any modifications and export the Gerber files for fabrication. 4. Order the PCB - Submit the Gerber files to your preferred PCB manufacturer. 5. Get the Components - Purchase the components from the BOM and a compatible board. 6. Assemble the Hardware - Solder the components and…

Getting to blinky, from the project README
From the project README

Main components on the Getting to blinky

Getting to blinky bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
7555
U1
1
CR2032
BT1
1
LED
D1
1
1uf
C1
2
1K
R1, R3
1
470K
R2

Getting to blinky design files

The KiCad project lives in the ImSeanConroy/getting-to-blinky repository on GitHub; these links point at the commit this page was built from.

Getting to blinky: common questions

How big is the Getting to blinky PCB?

The Getting to blinky measures 34.5 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Getting to blinky?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Getting to blinky design files?

From the ImSeanConroy/getting-to-blinky repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Getting to blinky design in my own project?

Yes, under the terms of its MIT license, which ImSeanConroy chose for the repository.