Led matrix

ImSeanConroy·led-matrix·PCB/led-matrix.kicad_pcb

Led matrix PCB layout, top view — open source board by ImSeanConroy

About the Led matrix PCB

Led matrix is an open source PCB design by ImSeanConroy, published on GitHub under the MIT license. It is a 2-layer board measuring 58 × 18 mm, with 25 components from 3 distinct parts.

By type, the board carries 12 diodes, 12 capacitors and 1 connector.

It belongs with the displays & leds designs in this gallery.

From the project

Complete design files for a 2x6 LED metrix, created using KiCad.

This project is a minimal, compact 12-pixel LED matrix (2 rows × 6 columns), based on WS2812D addressable LEDs and created using KiCad.

1. Open the Project - Open the .kicadpro file in KiCad to view the project. 2. Review the Design - Inspect the schematic and PCB layout to ensure it meets your needs. 3. Customize or Export - Make any modifications and export the Gerber files for fabrication. 4. Order the PCB - Submit the Gerber files to your preferred PCB manufacturer. 5. Get the Components - Purchase the components from the BOM and a compatible board. 6. Assemble the Hardware - Solder the…

Led matrix, from the project README
From the project README

Led matrix bill of materials (BOM)

25 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CONN_02X03_ODD_EVEN
Conn_02x03_Odd_Even
J1
12
APA-106-F5
D1, D2, D3, D4, D5, D6, D7, D8 +4
12
100N
100n
C1, C2, C3, C4, C5, C6, C7, C8 +4

Led matrix design files

The KiCad project lives in the ImSeanConroy/led-matrix repository on GitHub; these links point at the commit this page was built from.

Led matrix: common questions

How big is the Led matrix PCB?

The Led matrix measures 58 × 18 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Led matrix?

25 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Led matrix design files?

From the ImSeanConroy/led-matrix repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Led matrix design in my own project?

Yes, under the terms of its MIT license, which ImSeanConroy chose for the repository.

Similar boards