PowerSwitch

iNavFlight·hardware·PowerSwitch/PowerSwitch.kicad_pcb

PowerSwitch PCB layout, top view — open source board by iNavFlight
Simulate this board

About the PowerSwitch PCB

PowerSwitch is an open source PCB design by iNavFlight, published on GitHub. It is a 2-layer board measuring 14.9 × 7.5 mm, with 9 components from 8 distinct parts.

By type, the board carries 4 resistors, 3 connectors and 2 transistors.

From the project

High side power switch that can be controlled by the flight controller used PINIO.

High side power switch that can be controlled by the flight controller used PINIO.

Switching on the high side (instead of the simpler low side) is useful for devices that must stay at exactly the same ground potential (e.g. camera and VTX).

- 2x 0603 6k8 resistor - 1x 0603 47k resistor - 1x 0603 10k resistor - 1x SOT23 AO3400 N-Channel MOSFET - 1x SOT23 AO3401 P-Channel MOSFET

PowerSwitch, from the project README
From the project README

PowerSwitch bill of materials (BOM)

9 components, 8 distinct parts.

QtyPartRefs
1
AO3400
Q1
1
AO3401
Q2
1
IN
J1
1
CTRL
J2
1
OUT
J3
2
6k8
R1, R3
1
47k
R2
1
10k
R4

PowerSwitch design files

The KiCad project lives in the iNavFlight/hardware repository on GitHub; these links point at the commit this page was built from.

PowerSwitch: common questions

How big is the PowerSwitch PCB?

The PowerSwitch measures 14.9 × 7.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PowerSwitch?

9 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the PowerSwitch design files?

From the iNavFlight/hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the PowerSwitch design in my own project?

The repository has no license, so all rights stay with iNavFlight. Use it as a reference, and ask the author before reusing the design.

More boards in hardware