TaggerKeypadDisplay
About the TaggerKeypadDisplay PCB
TaggerKeypadDisplay is an open source PCB design by Infinitag, published on GitHub. It is a 2-layer board measuring 38 × 59 mm, with 27 components from 19 distinct parts.
Other key parts include the RT9193 and IRLML2502. By type, the board carries 8 capacitors, 6 switches, 4 resistors, 3 diodes, 2 ICs and 2 transistors.
From the project
Files for the INFINITAG hardware
All hardware files for the INFINITAG laser tag system
Main components on the TaggerKeypadDisplay
TaggerKeypadDisplay bill of materials (BOM)
27 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RT9193 | SOT94P279X129-5N | U1 |
| 1 | IRLML2502 UG-2864HSWEG01 | 1X30-0.7MM | U2 |
| 1 | FDN304P BSS138 | SOT-23 | Q1 |
| 1 | BSS138 | SOT-23 | Q2 |
| 1 | JST_PH_Keypad | JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J1 |
| 1 | JST_PH_Display | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J2 |
| 1 | key_up | Infinitag_Keypad_Button | SW1 |
| 1 | key_down | Infinitag_Keypad_Button | SW2 |
| 1 | key_left | Infinitag_Keypad_Button | SW3 |
| 1 | key_right | Infinitag_Keypad_Button | SW4 |
| 1 | key_back | Infinitag_Keypad_Button | SW5 |
| 1 | key_enter | Infinitag_Keypad_Button | SW6 |
| 3 | 1N4148 | D_SOD-123 | D1, D2, D3 |
| 2 | 100NF 10uF | C_0805_2012Metric | C1, C2 |
| 3 | 100NF 2.2uF | C_0805_2012Metric | C3, C4, C6 |
| 1 | 220UF/16V 2.2uF | C_0805_2012Metric | C5 |
| 1 | 22PF 2.2uF | C_0805_2012Metric | C7 |
| 1 | 220UF/16V 10uF | C_0805_2012Metric | C8 |
| 4 | 10K | R_Array_Convex_4x0603 | RN1, RN2, RN3, RN4 |
TaggerKeypadDisplay design files
The KiCad project lives in the Infinitag/Hardware repository on GitHub; these links point at the commit this page was built from.
TaggerKeypadDisplay: common questions
How big is the TaggerKeypadDisplay PCB?
The TaggerKeypadDisplay measures 38 × 59 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TaggerKeypadDisplay?
27 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TaggerKeypadDisplay design files?
From the Infinitag/Hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the TaggerKeypadDisplay design in my own project?
The repository has no license, so all rights stay with Infinitag. Use it as a reference, and ask the author before reusing the design.
