9 open source boards using the RT9193
Real designs built with the RT9193, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenDrive-Genesis
soniccd123
83.8 × 49.8 mm28 parts2LNo license45STM32
Printalyzer Densitometer - Main Board
dektronics
105 × 38 mm76 parts4LNo license37STM32
OpenDrive-Programmer
soniccd123
83.3 × 92.7 mm48 parts2LNo license6STM32
Stm32mp1 som
rcardenes
54.3 × 70.3 mm151 parts2LNo license1AVR/Arduino
Dreamstalker
orpaltech
79 × 85 mm111 parts2LNo license0HSLinkIso
cherry-embedded
65 × 40 mm53 parts2LApache-2.044TaggerKeypadDisplay
Infinitag
38 × 59 mm27 parts2LNo license6- schematic only · 35 partsSTM32
Blue pill
lhondareyte
35 parts2LCC-BY-4.01 STM32
PanelGalexy250509 1
NTURacingTeam
116 × 148 mm149 parts4LNo license4
How designs wire the RT9193
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the RT9193 connects to, and the resistors, capacitors and other passives placed on it.
- The VOUT pin has a decoupling capacitor on 8 of 8 designs, most often 1 µF (then 100 nF).
- The VIN pin has a decoupling capacitor on 6 of 8 designs, most often 1 µF (then 10 µF).
- The EN pin is tied to 5V on 7 of 8 designs.
- The BP pin has a capacitor to GND on 5 of 8 designs, most often 22 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 88% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 5V 88% | — |
| BPpin 4 | Connected to: Signal 63% · not connected 25% |
|
| VOUTpin 5 | Connected to: 3.3V 88% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenDrive-Genesis by soniccd123, HSLinkIso by cherry-embedded, Printalyzer Densitometer - Main Board by dektronics and TaggerKeypadDisplay by Infinitag.
The RT9193 in open source designs
The gallery holds 9 open source boards using the RT9193 from 9 GitHub repositories; a typical one measures about 81.2 × 64.7 mm and carries around 53 components.
78% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is OpenDrive-Genesis by soniccd123.
Parts used alongside the RT9193
Microcontrollers on boards using the RT9193
What boards using the RT9193 are built for
RT9193: common questions
Where can I find a RT9193 reference design?
Each of the 9 boards on this page is a real design using the RT9193. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the RT9193 VOUT pin?
The VOUT pin has a decoupling capacitor on 8 of 8 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the RT9193.
What decoupling capacitors do designs use on the RT9193 VIN pin?
The VIN pin has a decoupling capacitor on 6 of 8 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the RT9193.
How is the RT9193 EN pin connected?
The EN pin is tied to 5V on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the RT9193.
Which microcontrollers do boards using the RT9193 use?
Most are built on STM32 (5) and AVR/Arduino (1).
How big is a typical board using the RT9193?
The median is 81.2 × 64.7 mm, and 78% are two-layer designs.
What is the most popular open source board using the RT9193?
By GitHub stars, OpenDrive-Genesis by soniccd123, with 45 stars.
Can I simulate one of these boards using the RT9193 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.