Adaptateurs NiveauxSPI
About the Adaptateurs NiveauxSPI PCB
Adaptateurs NiveauxSPI is an open source PCB design by Ingwie, published on GitHub. It is a 2-layer board measuring 102.9 × 49.5 mm, with 33 components from 17 distinct parts.
Other key parts include the CONV_5V/3.3V and CONV_5V_3-3V_8. By type, the board carries 14 connectors, 12 capacitors, 6 ICs and 1 resistor.
From the project
OpenAVRc Hardware and addons
This is the hardware / addons part of OpenAVRc.
For source code or documentation : Visit https://github.com/Ingwie/OpenAVRc_Dev
You will find here all hardwares developped by the OpenAVRc Team.
This is the main board used by our OpenAVRc project. V2.0 (deprecated) V2.1 * V2.2 (actually under development)
1. Long Range hardwares solutions MultiProtocol&Lora ExpressLrs Crossfire_TBS
Main components on the Adaptateurs NiveauxSPI
Adaptateurs NiveauxSPI bill of materials (BOM)
33 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | CONV_5V/3.3V | Level_Convertissor_W10.16mm | U1, U2, U3, U4 |
| 1 | CONV_5V/3.3V | Level_Convertissor_SMD | U5 |
| 1 | CONV_5V_3-3V_8 | Level_Convertissor_8_W10.16mm | U6 |
| 1 | RFM95W | RFM95W | J1 |
| 1 | MPM_ 4en1 | PinHeader_2x05_P2.00mm_Vertical | J2 |
| 1 | MPM_4in1 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | SMA | SMA_Amphenol_132289_EdgeMount | J4 |
| 3 | SpirfMod | PinHeader_1x07_P2.54mm_Vertical | P1, P3, P9 |
| 1 | NRF24L01 | PinHeader_2x04_P2.54mm_Vertical | P2 |
| 1 | CC2500 | PinHeader_2x06_P2.54mm_Vertical | P4 |
| 1 | SpirMod | PinHeader_1x07_P2.54mm_Vertical | P5 |
| 1 | A7105 | Pin_Header_Straight_1x09_Pitch2mm | P6 |
| 1 | CONN_01X07 | PinHeader_1x07_P2.54mm_Vertical | P7 |
| 1 | CONN_01X10 | PinHeader_2x05_P2.54mm_Vertical | P8 |
| 1 | SpirfMod | PinHeader_2x05_P2.54mm_Vertical | P10 |
| 12 | 100nF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +4 |
| 1 | 20K | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
Adaptateurs NiveauxSPI design files
The KiCad project lives in the Ingwie/OpenAVRc_Hw repository on GitHub; these links point at the commit this page was built from.
Adaptateurs NiveauxSPI: common questions
How big is the Adaptateurs NiveauxSPI PCB?
The Adaptateurs NiveauxSPI measures 102.9 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adaptateurs NiveauxSPI?
33 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Adaptateurs NiveauxSPI design files?
From the Ingwie/OpenAVRc_Hw repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Adaptateurs NiveauxSPI design in my own project?
The repository has no license, so all rights stay with Ingwie. Use it as a reference, and ask the author before reusing the design.
