Carte Embarquée
INSA-GEI·Helicoptere·pcb/carte_embarque/carte_embarque.kicad_pcb
About the Carte Embarquée PCB
Carte Embarquée is an open source STM32 PCB design by INSA-GEI, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 90 × 50 mm, with 29 components from 16 distinct parts.
Its main chip is the STM32L031, from the STM32 family. Other key parts include the XBee, STEVAL-MKI176V1 and MIC4427. By type, the board carries 8 resistors, 7 capacitors, 4 ICs, 4 connectors, 2 transistors and 2 diodes.
From the project
Modèle hélicoptère développé au GEI et utilisé en automatique 4éme année GEI
Main components on the Carte Embarquée
Carte Embarquée bill of materials (BOM)
29 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L031 | STM32-Nucleo-32 | U1 |
| 1 | XBee | Xbee3 | U2 |
| 1 | STEVAL-MKI176V1 | DIP-24_W15.24mm_Socket_LongPads | U3 |
| 1 | MIC4427 | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 2 | NTD5865NLT4G | TO-252-3_TabPin4 | Q1, Q2 |
| 3 | Conn_01x02 | JST_VH_B2PS-VH_1x02_P3.96mm_Horizontal | J1, J2, J3 |
| 1 | Conn_01x02 | DF3A-2P-2DS | J4 |
| 2 | NRVTSA4100ET3G | D_SMA_Handsoldering | D1, D2 |
| 1 | HI1812T800R-10 | L_1812_4532Metric_Pad1.30x3.40mm_HandSolder | FB1 |
| 1 | 10mH | L_Wuerth_WE-PD2-Typ-L | L1 |
| 4 | 10µF | CP_EIA-7343-31_Kemet-D | C1, C2, C6, C7 |
| 3 | 100nF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3, C4, C5 |
| 2 | 0R | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2 |
| 2 | 10R | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3, R4 |
| 2 | 1K | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R5, R6 |
| 2 | 4,7K | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R7, R8 |
Carte Embarquée design files
The KiCad project lives in the INSA-GEI/Helicoptere repository on GitHub; these links point at the commit this page was built from.
Carte Embarquée: common questions
What microcontroller does the Carte Embarquée use?
The Carte Embarquée is built around the STM32L031, from the STM32 family.
How big is the Carte Embarquée PCB?
The Carte Embarquée measures 90 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Carte Embarquée?
29 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Carte Embarquée design files?
From the INSA-GEI/Helicoptere repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Carte Embarquée design in my own project?
Yes, under the terms of its GPL-3.0 license, which INSA-GEI chose for the repository.
Can I test firmware for the Carte Embarquée without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Helicoptere
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k