Universal composite
intelliputer·video-composites·universal/project/kicad/universal-composite.kicad_pcb
About the Universal composite PCB
Universal composite is an open source PCB design by intelliputer, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 80 × 50 mm, with 4 components from 3 distinct parts.
By type, the board carries 2 transistors and 2 connectors.
From the project
Designs and boards for conversion from RF modulators to RCA
This note compares the Atari 2600 and Intellivision amplifier approaches in this repository and proposes a common design direction for consoles that make baseband composite video available before their RF modulator.
It is intended for NTSC Intellivision I, Intellivision II, and Sears Telegames / Super Video Arcade 497.75022, as well as an Atari 2600 after the correct pre-RF video tap has been identified. It is not an RF-to-composite converter, and it cannot make an RF-only or RGB-only signal compatible without an appropriate preceding circuit.
Universal composite bill of materials (BOM)
4 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2N2222A EBC | TO-92_EBC | Q1, Q2 |
| 1 | CONSOLE | Header_1x04 | J1 |
| 1 | A/V OUT | Header_1x04 | J2 |
Universal composite design files
The KiCad project lives in the intelliputer/video-composites repository on GitHub; these links point at the commit this page was built from.
Universal composite: common questions
How big is the Universal composite PCB?
The Universal composite measures 80 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Universal composite?
4 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Universal composite design files?
From the intelliputer/video-composites repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Universal composite design in my own project?
Yes, under the terms of its GPL-3.0 license, which intelliputer chose for the repository.