Atari composite

intelliputer·video-composites·atari/project/kicad/atari-composite.kicad_pcb

Atari composite PCB layout, top view — open source board by intelliputer

About the Atari composite PCB

Atari composite is an open source PCB design by intelliputer, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 38.7 × 17.8 mm, with 14 components from 13 distinct parts.

By type, the board carries 8 resistors, 2 transistors, 2 connectors and 1 capacitor.

It belongs with the audio designs in this gallery.

From the project

Designs and boards for conversion from RF modulators to RCA

This is the selected quality-focused composite-video modification for an Atari 2600. It taps the console's pre-RF video and audio signals, buffers the video, and provides composite video plus mono audio for RCA connectors. It is not an RF-to-composite demodulator.

The board implements a two-stage discrete transistor amplifier based on a design by simon.plata. Compared with the single-transistor alternative that was evaluated for this repository, this circuit provides adjustable video gain and is the preferred option where the best composite-video result is more important than the lowest…

Atari composite bill of materials (BOM)

14 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
2N3904
Q1
1
2N3906
Q2
1
Video
J1
1
Output
J2
1
5k
RV1
1
47pF
C1
2
1k
R1, R3
1
3k3
R2
1
150
R4
1
68
R5
1
18
R6
1
75
R7
1
10k
R8

Atari composite design files

The KiCad project lives in the intelliputer/video-composites repository on GitHub; these links point at the commit this page was built from.

Atari composite: common questions

How big is the Atari composite PCB?

The Atari composite measures 38.7 × 17.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Atari composite?

14 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Atari composite design files?

From the intelliputer/video-composites repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Atari composite design in my own project?

Yes, under the terms of its GPL-3.0 license, which intelliputer chose for the repository.

More boards in video-composites

Similar boards