HardLabs

PwrIO

intergalaktik·Extension_Boards_for_Olimex_GateMate·pwrIO/pwrIO.kicad_pcb

PwrIO PCB layout, top view — open source board by intergalaktik

About the PwrIO PCB

PwrIO is an open source PCB design by intergalaktik, published on GitHub under the Custom license license. It is a 4-layer board measuring 33.7 × 30.5 mm, with 45 components from 16 distinct parts.

Other key parts include the TLV61225DC and TB6612FNG. By type, the board carries 19 resistors, 14 capacitors, 8 connectors, 3 ICs and 1 inductor.

From the project

Simple extension boards for Olimex GateMate FPGA Board

- [x] Schematic - [x] PCB - [x] order PCB - [ ] assemble PCB - [ ] design confirmed working

- [x] Schematic - [x] PCB - [x] order PCB - [x] assemble PCB - [ ] design confirmed working

- [x] Schematic - [x] PCB - [x] order PCB - [x] assemble PCB - [x] design confirmed working *

3V3 volt is not connected on PMOD side - wire can fix that. Once PINS A8 and B8 are set to 0 - PMOD side does the blinks on all pins Checked with 64x64 LED panel and it works * LEvel shifting for aoutput may not be needed - and for input could be done cheaper -…

PwrIO, from the project README
From the project README

Main components on the PwrIO

TLV61225DCTB6612FNG

PwrIO bill of materials (BOM)

45 components, 16 distinct parts.

QtyPartRefs
1
TLV61225DC
IC3
2
TB6612FNG
U1, U2
2
MOTOR1
J1, J4
2
MOTOR2
J2, J5
1
VCC_MOTOR
J3
1
MISC
J6
1
ENC1
J7
1
ENC2
J8
1
4.7uH
L1
4
100n
C1, C6, C7, C12
8
10u
C2, C3, C4, C5, C8, C9, C10, C11
2
10uF
C13, C14
13
R200
R1, R2, R3, R4, R5, R6, R7, R8 +5
1
RC0603FR-071K1L
R200
R14
1
RC0603FR-071K1L
10K
R15
4
10K
R16, R17, R18, R19

PwrIO design files

The KiCad project lives in the intergalaktik/Extension_Boards_for_Olimex_GateMate repository on GitHub; these links point at the commit this page was built from.

PwrIO: common questions

How big is the PwrIO PCB?

The PwrIO measures 33.7 × 30.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the PwrIO?

45 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the PwrIO design files?

From the intergalaktik/Extension_Boards_for_Olimex_GateMate repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PwrIO design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in Extension_Boards_for_Olimex_GateMate