CarteAdaptationPiezo
About the CarteAdaptationPiezo PCB
CarteAdaptationPiezo is an open source PCB design by IOGS-LEnsE-ressources, published on GitHub. It is a 2-layer board measuring 48.8 × 29.5 mm, with 8 components from 8 distinct parts.
Other key parts include the LM358. By type, the board carries 3 connectors, 2 resistors, 1 IC and 1 capacitor.
From the project
You can Download or Clone this repository.
You can Download or Clone this repository.
Then, you have to go to the appli directory and start the application by the following instruction:
This application is coded in Python (3.10 or more) and it is based on PyQt6.
To be used with the Zygo interferometer system, you need to install specific drivers and Python API for a Basler USB camera. Piezo module is controlled by a NI-DAQ module (USB) that requires also NI drivers.
Main components on the CarteAdaptationPiezo
CarteAdaptationPiezo bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM358 | DIP-8_W7.62mm_LongPads | U1 |
| 1 | Nucleo | PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | Output | PinHeader_1x02_P2.54mm_Horizontal | J2 |
| 1 | POWER_IN_12V | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | 47k Multi | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 100n | C_Disc_D7.5mm_W5.0mm_P7.50mm | C1 |
| 1 | 56k | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | 100k | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
CarteAdaptationPiezo design files
The KiCad project lives in the IOGS-LEnsE-ressources/aberrations-gui repository on GitHub; these links point at the commit this page was built from.
CarteAdaptationPiezo: common questions
How big is the CarteAdaptationPiezo PCB?
The CarteAdaptationPiezo measures 48.8 × 29.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CarteAdaptationPiezo?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the CarteAdaptationPiezo design files?
From the IOGS-LEnsE-ressources/aberrations-gui repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the CarteAdaptationPiezo design in my own project?
The repository has no license, so all rights stay with IOGS-LEnsE-ressources. Use it as a reference, and ask the author before reusing the design.
