Universal-Stepper-Driver-Rpi

IRNAS·Universal-Stepper-Driver-Rpi

Universal-Stepper-Driver-Rpi PCB layout, top view — open source STM32 board by IRNAS

About the Universal-Stepper-Driver-Rpi PCB

Universal-Stepper-Driver-Rpi is an open source STM32 PCB design by IRNAS, published on GitHub under the Custom license license. It is a 2-layer board measuring 65 × 56.5 mm, with 83 components from 39 distinct parts.

Its main chip is the STM32F411RE, from the STM32 family. Other key parts include the INA169, MPQ4420 and ULN2003V. By type, the board carries 23 resistors, 21 capacitors, 15 connectors, 8 jumpers, 5 ICs and 3 switches.

It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.

From the project

Universal stepper driver in shape of Raspberry Pi Hat. It supports all signals for Bipolar stepper motors thrue RPi header and have Unipolar stepper connectors and drivers.

Here you can find documentation for Universal stepper driver in shape of Raspberry Pi Hat. It supports all signals for Bipolar stepper motors thrue RPi header and have Unipolar stepper connectors and drivers. This driver is GRBL comatibile.

All our projects are as usefully open-source as possible.

Hardware including documentation is licensed under CERN OHL v.1.2. license

Universal-Stepper-Driver-Rpi, from the project README
From the project README

Main components on the Universal-Stepper-Driver-Rpi

STM32F411REINA169MPQ4420ULN2003V

Universal-Stepper-Driver-Rpi bill of materials (BOM)

83 components, 39 distinct parts.

QtyPartRefs
1
STM32F411RE
U1
1
INA169
U2
1
MPQ4420
U3
2
ULN2003V
U4, U5
1
CRYSTAL_SMD_16MHz
Y1
1
USB_OTG
P1
2
CONN_01X02
P2, P3
2
CONN_01X03
P4, P8
1
Universal_Serial_Connector
P5
1
CONN_01X06
P6
1
RPI_header
P7
3
CONN_01X04
P9, P11, P17
1
CONN_01X02
P12
3
CONN_28BYJ-48
P13, P14, P15
1
F_Small
F1
8
Jumper_NC_Small
JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8
1
16k5
Rl1
1
0.1R
Rs1
1
SW_PUSH
SW1
2
SW_PUSH
SW2, SW3
Show 19 more
QtyPartRefs
1
LED_RED
D1
2
LED_GREEN
D2, D3
1
10uH
L1
15
100nF
C1, C2, C3, C4, C5, C6, C7, C12 +7
2
20pF
C8, C9
1
10uF
C10
1
4.7uF
C11
2
22pF
C19, C20
4
0R
R1, R2, R3, R4
5
10k
R5, R10, R19, R25, R27
3
1k
R6, R11, R12
2
100k
R7, R18
2
4k7
R13, R14
2
100R
R15, R16
1
1M
R17
1
20R
R20
1
51k
R21
1
13k
R23
1
41k2
R24

Universal-Stepper-Driver-Rpi design files

The KiCad project lives in the IRNAS/Universal-Stepper-Driver-Rpi repository on GitHub; these links point at the commit this page was built from.

Universal-Stepper-Driver-Rpi: common questions

What microcontroller does the Universal-Stepper-Driver-Rpi use?

The Universal-Stepper-Driver-Rpi is built around the STM32F411RE, from the STM32 family.

How big is the Universal-Stepper-Driver-Rpi PCB?

The Universal-Stepper-Driver-Rpi measures 65 × 56.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Universal-Stepper-Driver-Rpi?

83 components, from 39 distinct parts. The full bill of materials is listed on this page.

Where can I download the Universal-Stepper-Driver-Rpi design files?

From the IRNAS/Universal-Stepper-Driver-Rpi repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Universal-Stepper-Driver-Rpi design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Universal-Stepper-Driver-Rpi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards