LED-Matrix-Sim
IsaacRudnick·LED-Matrix-Sim·KiCad/KiCad.kicad_pcb
About the LED-Matrix-Sim PCB
LED-Matrix-Sim is an open source PCB design by IsaacRudnick, published on GitHub. It is a 2-layer board measuring 83.2 × 82.6 mm, with 16 components from 10 distinct parts.
By type, the board carries 5 connectors, 5 switches and 5 resistors.
It belongs with the displays & leds designs in this gallery.
From the project
A collection of visual simulations for a 16x16 WS2812B LED matrix, powered by ESP32.
A collection of visual simulations for a 16x16 WS2812B LED matrix, powered by ESP32.
PCB design files are in KiCad/. GerberOrderv3.zip` contains ready-to-order Gerbers.
The LED matrix is powered directly from the ESP-32S's VIN pin (5V), which is why MAXBRIGHTNESS` is kept low — drawing too much current through VIN can cause instability. The data line connects to GPIO 26. Each button connects between its GPIO pin and GND; the ESP-32S's internal pullups keep the lines high when the button is open — no external pull-up resistors are needed on the PCB.
LED-Matrix-Sim bill of materials (BOM)
16 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x03 | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J1 |
| 2 | Conn_01x02 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2, J3 |
| 2 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J4, J5 |
| 1 | C_Polarized | CP_Radial_D5.0mm_P2.50mm | 0.1uF1 |
| 1 | SW_PushMid | SW_PUSH_6mm | SW1 |
| 1 | SW_PushUp | SW_PUSH_6mm | SW2 |
| 1 | SW_PushLeft | SW_PUSH_6mm | SW3 |
| 1 | SW_PushRight | SW_PUSH_6mm | SW4 |
| 1 | SW_PushDown | SW_PUSH_6mm | SW6 |
| 5 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7, R8, R9, R10 |
LED-Matrix-Sim design files
The KiCad project lives in the IsaacRudnick/LED-Matrix-Sim repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCad/KiCad.kicad_pcb
- SchematicKiCad/KiCad.kicad_sch
LED-Matrix-Sim: common questions
How big is the LED-Matrix-Sim PCB?
The LED-Matrix-Sim measures 83.2 × 82.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LED-Matrix-Sim?
16 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the LED-Matrix-Sim design files?
From the IsaacRudnick/LED-Matrix-Sim repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LED-Matrix-Sim design in my own project?
The repository has no license, so all rights stay with IsaacRudnick. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k