LED-Matrix-Sloth

IsaacRudnick·LED-Matrix-Sloth·KiCad/KiCad.kicad_pcb

LED-Matrix-Sloth PCB layout, top view — open source board by IsaacRudnick

About the LED-Matrix-Sloth PCB

LED-Matrix-Sloth is an open source PCB design by IsaacRudnick, published on GitHub. It is a 2-layer board measuring 83.2 × 82.6 mm, with 16 components from 10 distinct parts.

By type, the board carries 5 connectors, 5 switches and 5 resistors.

It belongs with the displays & leds designs in this gallery.

From the project

A collection of visual simulations for a 16x16 WS2812B LED matrix, powered by ESP32. Based on this repo but including a special sloth sim.

A collection of visual simulations for a 16x16 WS2812B LED matrix, powered by ESP32. Based on this repo but including a special sloth sim.

PCB design files are in KiCad/. GerberOrderv3.zip` contains ready-to-order Gerbers.

The LED matrix is powered directly from the ESP-32S's VIN pin (5V), which is why MAXBRIGHTNESS` is kept low — drawing too much current through VIN can cause instability. The data line connects to GPIO 26. Each button connects between its GPIO pin and GND; the ESP-32S's internal pullups keep the lines high when the button is open — no external pull-up resistors are needed…

LED-Matrix-Sloth bill of materials (BOM)

16 components, 10 distinct parts.

QtyPartRefs
1
Conn_01x03
J1
2
Conn_01x02
J2, J3
2
Conn_01x04
J4, J5
1
C_Polarized
0.1uF1
1
SW_PushMid
SW1
1
SW_PushUp
SW2
1
SW_PushLeft
SW3
1
SW_PushRight
SW4
1
SW_PushDown
SW6
5
10k
R6, R7, R8, R9, R10

LED-Matrix-Sloth design files

The KiCad project lives in the IsaacRudnick/LED-Matrix-Sloth repository on GitHub; these links point at the commit this page was built from.

LED-Matrix-Sloth: common questions

How big is the LED-Matrix-Sloth PCB?

The LED-Matrix-Sloth measures 83.2 × 82.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LED-Matrix-Sloth?

16 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the LED-Matrix-Sloth design files?

From the IsaacRudnick/LED-Matrix-Sloth repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LED-Matrix-Sloth design in my own project?

The repository has no license, so all rights stay with IsaacRudnick. Use it as a reference, and ask the author before reusing the design.

Similar boards