The-RGB-of-Haptics
ItsAlphie·The-RGB-of-Haptics·PCB/PeltierDriver.kicad_pcb
About the The-RGB-of-Haptics PCB
The-RGB-of-Haptics is an open source PCB design by ItsAlphie, published on GitHub. It is a 4-layer board measuring 53.6 × 42.6 mm, with 31 components from 21 distinct parts.
Other key parts include the MAX1968EUI+T and LM358. By type, the board carries 10 capacitors, 7 resistors, 5 connectors, 2 ICs and 2 inductors.
From the project
Repository for our master thesis project: Building a haptic glove to research the influence of different haptic modalities on texture perception
By combining these primitives, the glove aims to approximate textures and materials in a way that enhances immersion in XR environments.
Main components on the The-RGB-of-Haptics
The-RGB-of-Haptics bill of materials (BOM)
31 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX1968EUI+T | SOP65P640X110-28N | IC1 |
| 1 | LM358 | SOP65P640X135-8N | U1 |
| 1 | Power | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | VIBR1 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | VIBR2 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Temperature Control & Flex Sensor | PinHeader_2x02_P2.54mm_Vertical | J4 |
| 1 | Haptic Motors | PinHeader_2x03_P2.54mm_Vertical | J6 |
| 1 | 20k - 50k | PinHeader_1x02_P2.54mm_Vertical | Flex1 |
| 1 | PeltierElement | PinHeader_1x02_P2.54mm_Vertical | PE1 |
| 1 | Thermistor_NTC | PinHeader_1x02_P2.54mm_Vertical | TH1 |
| 2 | ~ | DRV2605l | VIBR1, VIBR2 |
| 2 | 3.3µH | VLS6045 | L1, L2 |
| 6 | 1µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C6, C7 |
| 1 | 0.01µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 10µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 2 | 10NF 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10 |
| 2 | 50K 50k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4 |
| 1 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 50M 50m | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 32.5K 32.5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
The-RGB-of-Haptics design files
The KiCad project lives in the ItsAlphie/The-RGB-of-Haptics repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/PeltierDriver.kicad_pcb
- SchematicPCB/PeltierDriver.kicad_sch
- BOMPCB/BOM.csv
The-RGB-of-Haptics: common questions
How big is the The-RGB-of-Haptics PCB?
The The-RGB-of-Haptics measures 53.6 × 42.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the The-RGB-of-Haptics?
31 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the The-RGB-of-Haptics design files?
From the ItsAlphie/The-RGB-of-Haptics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the The-RGB-of-Haptics design in my own project?
The repository has no license, so all rights stay with ItsAlphie. Use it as a reference, and ask the author before reusing the design.