Supersaurus bone interactive
iwonder77·supersaurus-bone-interactive·hardware/bone-interactive-timer-board/bone-interactive-timer-board.kicad_pcb
About the Supersaurus bone interactive PCB
Supersaurus bone interactive is an open source PCB design by iwonder77, published on GitHub. It is a 2-layer board measuring 40 × 53 mm, with 49 components from 13 distinct parts.
Other key parts include the NE555P. By type, the board carries 19 resistors, 16 capacitors, 8 connectors, 3 ICs and 3 diodes.
From the project
Three-channel 555 monostable timer board driving RGB LED strips for a guess-the-dinosaur-bone exhibit at Thanksgiving Point's Museum of Ancient Life.
Three-channel 555 monostable timer board driving RGB LED strips for a guess-the-dinosaur-bone exhibit at Thanksgiving Point's Museum of Ancient Life.
https://github.com/user-attachments/assets/5193e17a-1725-41bf-98e3-4b2cfe211b8b
The Supersaurus bone interactive at Thanksgiving Point's Museum of Ancient Life invites visitors to guess which dinosaur the Supersaurus is related to based solely on scapula bone graphics. Guests place the Supersaurus scapula into one of three slots, each corresponding to a different dinosaur with its own scapula graphic. When they're ready to check their answer…

Main components on the Supersaurus bone interactive
Supersaurus bone interactive bill of materials (BOM)
49 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | NE555P | DIP-8_W7.62mm | U1, U2, U3 |
| 4 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1, J3, J5, J10 |
| 4 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J7, J8, J9, J11 |
| 3 | C364563 LED | LED_1206_3216Metric | D1, D2, D3 |
| 9 | C14663 0.1uF | C_0603_1608Metric | C1, C2, C5, C6, C8, C9, C11, C13 +1 |
| 3 | C21120 0.22uF | C_0603_1608Metric | C3, C7, C12 |
| 3 | C2886300 100uF | CP_Elec_6.3x5.4 | C4, C10, C15 |
| 1 | 1000uF | CP_Radial_D7.5mm_P2.50mm | C16 |
| 7 | C99198 10k | R_0603_1608Metric | R1, R2, R4, R5, R10, R14, R15 |
| 3 | C17513 1k | R_0805_2012Metric | R3, R6, R16 |
| 3 | C31850 22k | R_0603_1608Metric | R7, R11, R17 |
| 3 | C4216 33k | R_0603_1608Metric | R8, R12, R18 |
| 3 | C25819 47k | R_0603_1608Metric | R9, R13, R19 |
Supersaurus bone interactive design files
The KiCad project lives in the iwonder77/supersaurus-bone-interactive repository on GitHub; these links point at the commit this page was built from.
Supersaurus bone interactive: common questions
How big is the Supersaurus bone interactive PCB?
The Supersaurus bone interactive measures 40 × 53 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Supersaurus bone interactive?
49 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Supersaurus bone interactive design files?
From the iwonder77/supersaurus-bone-interactive repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Supersaurus bone interactive design in my own project?
The repository has no license, so all rights stay with iwonder77. Use it as a reference, and ask the author before reusing the design.