SID CS
About the SID CS PCB
SID CS is an open source PCB design by Ixox, published on GitHub. It is a 2-layer board measuring 83.8 × 40.6 mm, with 13 components from 8 distinct parts.
Other key parts include the 74HC165. By type, the board carries 6 switches, 2 connectors, 2 resistors, 1 IC and 1 capacitor.
From the project
PCBs, Panels and firmware for puting a 4 stereo voices midiboxSid in a 1U 19" rack
Contains all files needed for this project : http://midibox.org/forums/topic/20008-midibox-sid-rack-1u-project/
SID_CS/ Kicad files for the 1st surface control PCB
SID_CS2/ Kicad files for the 2nd surface control PCB
SID_MB/ Kicad files for the mother board
SID_MIXER/ Kicad files for the mixer PCB
midiboxsidv2044rack1U/ Firmware: Thorsten source code with some modification for the rack 1U PCBs
Main components on the SID CS
SID CS bill of materials (BOM)
13 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC165 | DIP-16_W7.62mm_LongPads | IC1 |
| 1 | IN | Pin_Header_Straight_1x05 | P2 |
| 1 | OUT | Pin_Header_Straight_1x05 | P8 |
| 1 | ENCODER_SW | FMEncoderWithSwitch2 | Enc1 |
| 6 | SWITCH | FMButton2 | S1, S2, S3, S4, S5, S6 |
| 1 | 100nF | C_Disc_D3_P2.5 | C1 |
| 1 | 10k | Resistor_Horizontal_RM7mm | R1 |
| 1 | RR8 | Resistor_Array_SIP8 | RR1 |
SID CS design files
The KiCad project lives in the Ixox/midibox-SID repository on GitHub; these links point at the commit this page was built from.
- LayoutSID_CS/SID_CS.kicad_pcb
SID CS: common questions
How big is the SID CS PCB?
The SID CS measures 83.8 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SID CS?
13 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the SID CS design files?
From the Ixox/midibox-SID repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SID CS design in my own project?
The repository has no license, so all rights stay with Ixox. Use it as a reference, and ask the author before reusing the design.
