ESP32-Mochi

izaanhussain·ESP32-Mochi·PCB/ESP32_Mochi.kicad_pcb

ESP32-Mochi PCB layout, top view — open source board by izaanhussain

About the ESP32-Mochi PCB

ESP32-Mochi is an open source PCB design by izaanhussain, published on GitHub under the MIT license. It is a 2-layer board measuring 48 × 30 mm, with 6 components from 5 distinct parts.

It belongs with the displays & leds and power & battery designs in this gallery.

From the project

esp32 mochi is the my version of the product dasai mochi , in this repo i have made the pcb for the mochi and have given a minimalistic code with the GIFs

A small animated desktop companion inspired by Dasai Mochi. this is made by using an ESP32-C3 SuperMini and a 0.96" SSD1306 OLED display. The repo has a custom KiCad PCB, Gerber files and a very basic Arduino animation firmware that displays the bitmapped frames of the 712 GIFs.

1) ESP32-C3 SuperMini as the controller 2) 0.96-inch, 128×64 SSD1306 I²C OLED 3) Bitmap-frame animation at a target of approximately 24 FPS 4) TTP223 touch sensor input 5) Buzzer connection 6) TP4056 USB-C LiPo charging module connection 7) Custom PCB designed in KiCad 8) KiCad source files and Gerber files included

ESP32-Mochi, from the project README
From the project README

ESP32-Mochi bill of materials (BOM)

6 components, 5 distinct parts.

QtyPartRefs
1
Conn_01x02
BUZZER1
2
Conn_01x08
ESP32_LEFT1, ESP32_RIGHT1
1
Conn_01x04
OLED_SSD1306
1
Conn_01x03
TOUCH_TTP223
1
Conn_01x04
TP4056

ESP32-Mochi design files

The KiCad project lives in the izaanhussain/ESP32-Mochi repository on GitHub; these links point at the commit this page was built from.

ESP32-Mochi: common questions

How big is the ESP32-Mochi PCB?

The ESP32-Mochi measures 48 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32-Mochi?

6 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32-Mochi design files?

From the izaanhussain/ESP32-Mochi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP32-Mochi design in my own project?

Yes, under the terms of its MIT license, which izaanhussain chose for the repository.

Similar boards