PiPlay3D
About the PiPlay3D PCB
PiPlay3D is an open source AVR/Arduino PCB design by iZboxo, published on GitHub. It is a 2-layer board measuring 46.2 × 60.3 mm, with 37 components from 19 distinct parts.
Its main chip is the ARDUINO_NANO_V2.X, from the AVR/Arduino family. Other key parts include the Reverse_Opto and CarON_Opto. By type, the board carries 17 connectors, 16 resistors, 2 ICs, 1 module and 1 transistor.
Main components on the PiPlay3D
PiPlay3D bill of materials (BOM)
37 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Reverse_Opto | DIP-4_W7.62mm_LongPads | U1 |
| 1 | CarON_Opto | DIP-4_W7.62mm_LongPads | U2 |
| 1 | ARDUINO_NANO_V2.X Arduino_Nano_v2.x | Arduino_Nano | A1 |
| 1 | AO3400A | SOT-23 | Q7 |
| 1 | CarON | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Reverse | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | THERMISTOR1 Thermistor1 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | THERMISTOR2 Thermistor2 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | THERMISTOR3 Thermistor3 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Fotoresistor | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | CONN_01X05_SOCKET Conn_01x05_Socket | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J7 |
| 7 | CONN_01X02_SOCKET Conn_01x02_Socket | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8, J9, J10, J11, J12, J13, J14 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J16 |
| 1 | CONN_01X01_PIN Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J17 |
| 10 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R7, R8, R9, R10, R11, R12 +2 |
| 4 | 100K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6 |
| 1 | 220R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
PiPlay3D design files
The KiCad project lives in the iZboxo/PiPlay3D repository on GitHub; these links point at the commit this page was built from.
- LayoutPiPlay/PiPlay.kicad_pcb
- SchematicPiPlay/PiPlay.kicad_sch
- BOMPiPlay/production/bom.csv
PiPlay3D: common questions
What microcontroller does the PiPlay3D use?
The PiPlay3D is built around the ARDUINO_NANO_V2.X, from the AVR/Arduino family.
How big is the PiPlay3D PCB?
The PiPlay3D measures 46.2 × 60.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PiPlay3D?
37 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PiPlay3D design files?
From the iZboxo/PiPlay3D repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PiPlay3D design in my own project?
The repository has no license, so all rights stay with iZboxo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PiPlay3D without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k