Angel Night light
jabgrall·Angel_Night-light·PCB/PCB-Ange.kicad_pcb
About the Angel Night light PCB
Angel Night light is an open source STM32 PCB design by jabgrall, published on GitHub. It is a 2-layer board measuring 75 × 75 mm, with 54 components from 29 distinct parts.
Its main chip is the STM32F103C6Tx, from the STM32 family. Other key parts include the MCP1642B, ADXL345 and INA317. By type, the board carries 20 capacitors, 18 resistors, 4 ICs, 3 transistors, 3 connectors and 3 switches.
Main components on the Angel Night light
Angel Night light bill of materials (BOM)
54 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C6Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | MCP1642B | MSOP-8_3x3mm_P0.65mm | U2 |
| 1 | ADXL345 | LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U3 |
| 1 | INA317 | VSSOP-8_3.0x3.0mm_P0.65mm | U4 |
| 3 | Q_PMOS_GSD | SOT-723 | Q1, Q2, Q3 |
| 1 | Alim | Keystone_SMD_5230_AAA | J1 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | Conn_02x02_Odd_Even | PinHeader_2x02_P1.27mm_Vertical_SMD | J3 |
| 1 | Microphone | micro_4mm | MK1 |
| 2 | SW_Push | SW_SPST_B3U-1000P-B | SW1, SW2 |
| 1 | SW_DIP_x01 | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W8.61mm_P2.54mm_LowProfile | SW3 |
| 1 | LED_RCGB | LED_D5.0mm-4_RGB | D1 |
| 1 | 4.7µH, Isat 2A | L_Bourns-SRN4018 | L1 |
| 9 | 100nF, 10V | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C5, C6, C7, C8, C9, C13 +1 |
| 4 | 1µF, 10V | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C10, C15, C16 |
| 4 | 10µF, 6.3V | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C12, C17, C19 |
| 1 | 4.7µF, 10V | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C11 |
| 1 | 100µF, 6.3V | R_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C18 |
| 1 | 100nF, 6.3V | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C20 |
| 4 | 10K, 63mW | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R13, R14 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1K, 63mW | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R9, R15 |
| 3 | 4K7, 63mW | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R11, R17 |
| 1 | 2K55, 63mW | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | 75R, 63mW | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | 47K, 63mW | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
| 1 | 249R, 63mW | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10 |
| 1 | 15R, 63mW | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12 |
| 1 | 78R7, 63mW | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R16 |
| 1 | 5R, 63mW | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R18 |
Angel Night light design files
The KiCad project lives in the jabgrall/Angel_Night-light repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/PCB-Ange.kicad_pcb
Angel Night light: common questions
What microcontroller does the Angel Night light use?
The Angel Night light is built around the STM32F103C6Tx, from the STM32 family.
How big is the Angel Night light PCB?
The Angel Night light measures 75 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Angel Night light?
54 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Angel Night light design files?
From the jabgrall/Angel_Night-light repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Angel Night light design in my own project?
The repository has no license, so all rights stay with jabgrall. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Angel Night light without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k