Localcam

jacksquare914·localcam·hardware/LocalCam1.kicad_pcb

Localcam PCB layout, top view — open source board by jacksquare914

About the Localcam PCB

Localcam is an open source PCB design by jacksquare914, published on GitHub. It is a 4-layer board measuring 75 × 44 mm, with 27 components from 19 distinct parts.

Other key parts include the Core1106 (RV1106G3) and USBLC6-2SC6. By type, the board carries 9 resistors, 8 capacitors, 3 connectors, 2 ICs, 2 diodes and 1 fuse.

From the project

A small 4-layer board that turns a Luckfox Core1106 system-on-module (Rockchip RV1106G3) into a network camera that never talks to anyone's cloud. A MIPI CSI-2 sensor comes in over an FPC, the module encodes H.264/H.265 on-chip, and the stream is served over RTSP to a local Friga

A small 4-layer board that turns a Luckfox Core1106 system-on-module (Rockchip RV1106G3) into a network camera that never talks to anyone's cloud. A MIPI CSI-2 sensor comes in over an FPC, the module encodes H.264/H.265 on-chip, and the stream is served over RTSP to a local Frigate NVR. Object detection runs on the module's own 1 TOPS NPU, on the camera, not on a server and not on someone else's GPU.

Main components on the Localcam

Core1106 (RV1106G3)USBLC6-2SC6

Localcam bill of materials (BOM)

27 components, 19 distinct parts.

QtyPartRefs
1
Core1106 (RV1106G3)
U1
1
USBLC6-2SC6
U2
1
USB-C 2.0
J1
1
microSD
J2
1
FPC 0.5mm 24p to SC3336
J3
1
1.5A hold
F1
1
DEBUG UART
H1
1
RESET
S1
1
SMAJ6.0CA
D1
1
STATUS red Vf~2.0V
D2
1
47uF/16V
C1
4
100nF
C2, C4, C6, C7
3
10uF/16V
C3, C5, C8
2
5.1k
R1, R2
1
10k
R3
1
330R
R4
2
4.7k
R5, R6
2
100k
R7, R8
1
1k
R9

Localcam design files

The KiCad project lives in the jacksquare914/localcam repository on GitHub; these links point at the commit this page was built from.

Localcam: common questions

How big is the Localcam PCB?

The Localcam measures 75 × 44 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Localcam?

27 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the Localcam design files?

From the jacksquare914/localcam repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Localcam design in my own project?

The repository has no license, so all rights stay with jacksquare914. Use it as a reference, and ask the author before reusing the design.