CupSNS
jan-weisgerber·CupSNS·kicad/CupSNS.kicad_pcb
About the CupSNS PCB
CupSNS is an open source PCB design by jan-weisgerber, published on GitHub under the MIT license. It is a 2-layer board measuring 85.2 × 85.2 mm, with 48 components from 12 distinct parts.
Other key parts include the LDC0851HDSGR and AMS1117. By type, the board carries 20 diodes, 17 resistors, 4 connectors, 3 capacitors, 2 ICs and 1 transistor.
From the project
A KiCAD electronics project for a proximity sensor cup detection board.
A KiCAD electronics project for a proximity sensor cup detection board.
- kicad/ - KiCAD project files (schematics, PCB layout) - libraries/ - Symbol, footprint, and 3D model libraries - fabrication/ - Manufacturing files (Gerbers, drill files, pick & place, BOM) - cad/ - CAD project files (game base parts) - hardwareversions/** - Versioned hardware releases
1. Open the project in KiCAD 2. Review the schematics in kicad/CupSNS.kicadsch 3. Check the PCB layout in kicad/CupSNS.kicadpcb
Main components on the CupSNS
CupSNS bill of materials (BOM)
48 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LDC0851HDSGR | DSG0008A | U1 |
| 1 | AMS1117 | SOT-223-3_TabPin2 | U2 |
| 1 | MMDT2222A | SOT-363_SC-70-6 | Q1PNP1 |
| 3 | S2B-PH-K-SLFSN | JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | CON1, CON2, CON3 |
| 1 | USB_C_Receptacle_PowerOnly_6P | CONN_10164359-00011LF_AMP | J1 |
| 1 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | Cbypass1 |
| 10 | LED_RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 10 | LED_GREEN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 1 | 4nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 2 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 15 | 51 Ohms | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +7 |
| 2 | 2.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13 |
CupSNS design files
The KiCad project lives in the jan-weisgerber/CupSNS repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/CupSNS.kicad_pcb
- Schematickicad/CupSNS.kicad_sch
CupSNS: common questions
How big is the CupSNS PCB?
The CupSNS measures 85.2 × 85.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CupSNS?
48 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the CupSNS design files?
From the jan-weisgerber/CupSNS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CupSNS design in my own project?
Yes, under the terms of its MIT license, which jan-weisgerber chose for the repository.