Encoder interface simple 3x2

janelia-kicad·encoder_interface_simple_3x2

Encoder interface simple 3x2 PCB layout, top view — open source board by janelia-kicad

About the Encoder interface simple 3x2 PCB

Encoder interface simple 3x2 is an open source PCB design by janelia-kicad, published on GitHub under the Custom license license. It is a 2-layer board measuring 69.9 × 40.6 mm, with 7 components from 6 distinct parts.

Other key parts include the SN74ABT541BDWR. By type, the board carries 2 connectors, 2 resistors, 1 IC and 1 capacitor.

From the project

- Repository Information - Description - Images - Schematic - Gerbers - Bill of Materials - PCB Parts - Supplemental Parts - Vendor Parts Lists - Supplemental Documentation - Assembly Instructions - Manufacturing Archive

- Repository Information - Description - Images - Schematic - Gerbers - Bill of Materials - PCB Parts - Supplemental Parts - Vendor Parts Lists - Supplemental Documentation - Assembly Instructions - Manufacturing Archive

- Name: encoder\interface\simple\3x2 - Version: 1.1 - License: Open-Source Hardware - URL: - Author: Peter Polidoro - Email:** peter@polidoro.io

Encoder interface simple 3x2, from the project README
From the project README

Main components on the Encoder interface simple 3x2

Encoder interface simple 3x2 bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SN74ABT541BDWR
Texas Instruments
U1
1
112661
BNC_DOUBLE_RA
Amphenol RF
P1
1
0740991005
HEADER_01X05_SMD_SHR
Molex
P2
1
PBC16SAAN
VAL**
Sullins Connector Solutions
MDB1
1
C1210X104K1RAC7800
0.1uF
KEMET
C1
2
ERJ-14NF3161U
3.16k
Panasonic Electronic Components
R1, R2

Encoder interface simple 3x2 design files

The KiCad project lives in the janelia-kicad/encoder_interface_simple_3x2 repository on GitHub; these links point at the commit this page was built from.

Encoder interface simple 3x2: common questions

How big is the Encoder interface simple 3x2 PCB?

The Encoder interface simple 3x2 measures 69.9 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Encoder interface simple 3x2?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Encoder interface simple 3x2 design files?

From the janelia-kicad/encoder_interface_simple_3x2 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Encoder interface simple 3x2 design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.