6 open source boards using the SN74ABT541BDWR
Real designs built with the SN74ABT541BDWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Stepper controller 3x2
janelia-kicad
70.5 × 41.9 mm31 parts2LCustom license2NXP
Backlight controller 6x3
janelia-kicad
140.3 × 67.3 mm87 parts2LCustom license0Backlight controller 5x3
janelia-kicad
121.3 × 67.3 mm80 parts2LCustom license0Stepper controller 5x3
janelia-kicad
121.3 × 67.3 mm65 parts2LCustom license0Backlight controller 3x2
janelia-kicad
70.5 × 41.9 mm40 parts2LCustom license0Encoder interface simple 3x2
janelia-kicad
69.9 × 40.6 mm7 parts2LCustom license0
How designs wire the SN74ABT541BDWR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SN74ABT541BDWR connects to, and the resistors, capacitors and other passives placed on it.
- Pin 20 has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 10 µF).
- Pin 10 is tied to GND on 6 of 6 designs.
- Pin 19 is tied to GND on 6 of 6 designs.
- Pin 11 has a series resistor on 3 of 6 designs, most often 75 Ω (then 287 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 10 | Connected to: GND 100% | — |
| Pin 11 | Connected to: Signal 67% · not connected 33% |
|
| Pin 12 | Connected to: Signal 67% · not connected 33% |
|
| Pin 13 | Connected to: Signal 67% · not connected 33% |
|
| Pin 14 | Connected to: Signal 67% · not connected 33% |
|
| Pin 15 | Connected to: BUFFER_TRI_STATE 33% · not connected 17% |
|
| Pin 16 | Connected to: Signal 83% · not connected 17% |
|
| Pin 17 | Connected to: Signal 100% |
|
| Pin 18 | Connected to: Signal 100% |
|
| Pin 19 | Connected to: GND 100% | — |
| Pin 20 | Connected to: SN74ABT541BDWR 50%, a connector 33% · 5V 33% |
|
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Stepper controller 3x2 by janelia-kicad, Backlight controller 3x2 by janelia-kicad, Backlight controller 5x3 by janelia-kicad and Backlight controller 6x3 by janelia-kicad.
The SN74ABT541BDWR in open source designs
The gallery holds 6 open source boards using the SN74ABT541BDWR from 6 GitHub repositories; a typical one measures about 95.9 × 54.6 mm and carries around 53 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Stepper controller 3x2 by janelia-kicad.
Parts used alongside the SN74ABT541BDWR
Microcontrollers on boards using the SN74ABT541BDWR
What boards using the SN74ABT541BDWR are built for
SN74ABT541BDWR: common questions
Where can I find a SN74ABT541BDWR reference design?
Each of the 6 boards on this page is a real design using the SN74ABT541BDWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SN74ABT541BDWR pin 20 connected?
Pin 20 has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the SN74ABT541BDWR.
How is the SN74ABT541BDWR pin 10 connected?
Pin 10 is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SN74ABT541BDWR.
How is the SN74ABT541BDWR pin 19 connected?
Pin 19 is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SN74ABT541BDWR.
What parts are used alongside the SN74ABT541BDWR?
The BUFFER_TRI_STATE, NUD3124LT1G, OPTOISO_2CHAN and TMC429 appear in the most repositories here.
Which microcontrollers do boards using the SN74ABT541BDWR use?
Most are built on NXP (1).
How big is a typical board using the SN74ABT541BDWR?
The median is 95.9 × 54.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the SN74ABT541BDWR?
By GitHub stars, Stepper controller 3x2 by janelia-kicad, with 2 stars.
Can I simulate one of these boards using the SN74ABT541BDWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.