Lick detector interface
About the Lick detector interface PCB
Lick detector interface is an open source NXP PCB design by janelia-kicad, published on GitHub under the Custom license license. It is a 2-layer board measuring 42 × 100 mm, with 17 components from 3 distinct parts.
Its main chip is the 0305-0-15-15-47-27-10-0, from the NXP family.
From the project
This board was designed to connect to 12 lick_detector boards.
Lick detector interface bill of materials (BOM)
17 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | 0525590853 CONN_FFC_8_VERT Molex | Molex_FFC_1x8_P0.5mm_Vertical | P1, P2, P3, P4, P5, P6, P7, P8 +4 |
| 4 | MOUNTING_HOLE_4-40 | MOUNTING_HOLE_4-40 | MH1, MH2, MH3, MH4 |
| 1 | 0305-0-15-15-47-27-10-0 TEENSY_4.1 Mill-Max Manufacturing Corp. | TEENSY_4.1 | TEENSY1 |
Lick detector interface design files
The KiCad project lives in the janelia-kicad/lick_detector_interface repository on GitHub; these links point at the commit this page was built from.
Lick detector interface: common questions
What microcontroller does the Lick detector interface use?
The Lick detector interface is built around the 0305-0-15-15-47-27-10-0, from the NXP family.
How big is the Lick detector interface PCB?
The Lick detector interface measures 42 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lick detector interface?
17 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lick detector interface design files?
From the janelia-kicad/lick_detector_interface repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Lick detector interface design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Lick detector interface without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532