UniMixFeeders
About the UniMixFeeders PCB
UniMixFeeders is an open source PCB design by jarekkt, published on GitHub. It is a 4-layer board measuring 409.6 × 20 mm, with 94 components from 15 distinct parts.
Other key parts include the AP7375-33W5-7 and LPC11C22FBD48/301,. By type, the board carries 34 capacitors, 26 connectors, 26 resistors, 2 ICs, 2 fuses and 2 jumpers.
From the project
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
Main components on the UniMixFeeders
UniMixFeeders bill of materials (BOM)
94 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP7375-33W5-7 | SOT95P285X140-5N | IC1 |
| 1 | LPC11C22FBD48/301, LPC11C22FBD48_301, | QFP50P900X900X160-48N | IC2 |
| 1 | ABM7-20.000MHZ-D2Y-T | XTAL500X320X130N | Y1 |
| 2 | Conn_01x04_Male | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J1, J2 |
| 22 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J3, J4, J5, J6, J7, J8, J9, J10 +14 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J16 |
| 1 | Conn_01x06_Pin | PinHeader_2x03_P2.54mm_Vertical | J27 |
| 2 | PTSLR12106V175 | Fuse_1210_3225Metric | F1, F2 |
| 2 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | SK56 | D_SMB | D1 |
| 3 | 1uF | C_0603_1608Metric | C1, C9, C39 |
| 6 | 100n | C_0603_1608Metric | C2, C4, C6, C7, C8, C10 |
| 23 | 10uF | C_1206_3216Metric | C3, C5, C11, C12, C13, C14, C15, C16 +15 |
| 2 | 18pF | C_0603_1608Metric | C37, C38 |
| 26 | 1k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +18 |
UniMixFeeders design files
The KiCad project lives in the jarekkt/UniController repository on GitHub; these links point at the commit this page was built from.
UniMixFeeders: common questions
How big is the UniMixFeeders PCB?
The UniMixFeeders measures 409.6 × 20 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the UniMixFeeders?
94 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the UniMixFeeders design files?
From the jarekkt/UniController repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the UniMixFeeders design in my own project?
The repository has no license, so all rights stay with jarekkt. Use it as a reference, and ask the author before reusing the design.
