Unicontroller FDCAN head
About the Unicontroller FDCAN head PCB
Unicontroller FDCAN head is an open source PCB design by jarekkt, published on GitHub. It is a 4-layer board measuring 82.5 × 75.5 mm, with 76 components from 21 distinct parts.
Other key parts include the VNN3NV04PTR-E, TMC2209_SILENTSTEPSTICK, NUCLEO-G431KB, SN74LVC2G14DBV and TLE9251VSJ. By type, the board carries 26 resistors, 17 capacitors, 13 ICs, 13 connectors, 6 diodes and 1 jumper.
From the project
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
Main components on the Unicontroller FDCAN head
Unicontroller FDCAN head bill of materials (BOM)
76 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | VNN3NV04PTR-E | SOT230P700X180-4N | IC2, IC3, IC4, IC5 |
| 3 | TMC2209_SILENTSTEPSTICK | MODULE_TMC2209_SILENTSTEPSTICK | U1, U2, U3 |
| 1 | NUCLEO-G431KB | MODULE_NUCLEO-G431KB | U4 |
| 2 | SN74LVC2G14DBV | SOT-23-6 | U5, U6 |
| 1 | TLE9251VSJ | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 2 | XGZP6847A | DIP-6_W10.16mm | U9, U10 |
| 5 | Conn_01x04_Male | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J1, J2, J3, J25, J26 |
| 4 | Conn_01x03_Pin | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4, J6, J13, J14 |
| 4 | Conn_01x02_Male | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5, J10, J11, J12 |
| 1 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 4 | SK56 | D_SMB | D1, D2, D3, D4 |
| 2 | BAV99S | SOT-363_SC-70-6 | D5, D6 |
| 9 | 100n | C_0603_1608Metric | C1, C4, C7, C10, C11, C12, C13, C14 +1 |
| 3 | 2u2 | C_0603_1608Metric | C2, C5, C8 |
| 3 | 100uF/50V | CP_Radial_D8.0mm_P3.50mm | C3, C6, C9 |
| 2 | 10n | C_0603_1608Metric | C16, C17 |
| 9 | 1k | R_0603_1608Metric | R1, R11, R12, R13, R17, R18, R19, R20 +1 |
| 4 | 220R | R_0603_1608Metric | R2, R3, R4, R5 |
| 10 | 10k | R_0603_1608Metric | R6, R7, R8, R9, R10, R14, R15, R16 +2 |
| 1 | 120R | R_1206_3216Metric | R22 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22k | R_0603_1608Metric | R28, R29 |
Unicontroller FDCAN head design files
The KiCad project lives in the jarekkt/UniController repository on GitHub; these links point at the commit this page was built from.
Unicontroller FDCAN head: common questions
How big is the Unicontroller FDCAN head PCB?
The Unicontroller FDCAN head measures 82.5 × 75.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Unicontroller FDCAN head?
76 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Unicontroller FDCAN head design files?
From the jarekkt/UniController repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Unicontroller FDCAN head design in my own project?
The repository has no license, so all rights stay with jarekkt. Use it as a reference, and ask the author before reusing the design.
