SCS Interface Lte
JavaPowerFR·SCS·Hardware/SCS Interface V1/KiCad/SCS_Interface_Lte.kicad_pcb
About the SCS Interface Lte PCB
SCS Interface Lte is an open source PCB design by JavaPowerFR, published on GitHub under the MIT license. It is a 2-layer board measuring 21.7 × 43.7 mm, with 24 components from 19 distinct parts.
Other key parts include the LM397. By type, the board carries 8 resistors, 6 capacitors, 3 diodes, 2 connectors, 2 inductors and 1 IC.
From the project
SCS Interface
Main components on the SCS Interface Lte
SCS Interface Lte bill of materials (BOM)
24 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM397 | SOT-23-5 | U1 |
| 1 | MMBTA06 | SOT-23 | Q1 |
| 1 | SCS | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal_PNP | J1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | 1A | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | P4SMA39CA | D_SMA | D1 |
| 1 | ABS2 | Diode_Bridge_Diotec_ABS | D4 |
| 1 | FDLL4148 | D_MiniMELF | D5 |
| 2 | 4.3µ | L_Wuerth_MAPI-3020 | L1, L2 |
| 2 | 30p | C_0805_2012Metric | C1, C2 |
| 1 | 13p (OPT) | C_0805_2012Metric | C3 |
| 1 | 100n | C_0805_2012Metric | C4 |
| 1 | 1n | C_0805_2012Metric | C6 |
| 1 | 22µ | C_0805_2012Metric | C9 |
| 1 | 100 1/4W | R_1206_3216Metric | R1 |
| 1 | 1k | R_0805_2012Metric | R2 |
| 1 | 56k | R_0805_2012Metric | R3 |
| 4 | 10k | R_0805_2012Metric | R4, R5, R6, R8 |
| 1 | 20k | R_0805_2012Metric | R7 |
SCS Interface Lte design files
The KiCad project lives in the JavaPowerFR/SCS repository on GitHub; these links point at the commit this page was built from.
SCS Interface Lte: common questions
How big is the SCS Interface Lte PCB?
The SCS Interface Lte measures 21.7 × 43.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SCS Interface Lte?
24 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the SCS Interface Lte design files?
From the JavaPowerFR/SCS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SCS Interface Lte design in my own project?
Yes, under the terms of its MIT license, which JavaPowerFR chose for the repository.