Clkbrd3
jaycordaro·clkbrd3
About the Clkbrd3 PCB
Clkbrd3 is an open source PCB design by jaycordaro, published on GitHub under the BSD-2-Clause license. It is a 2-layer board measuring 42.6 × 36.2 mm, with 34 components from 23 distinct parts.
Other key parts include the ADP1710AUJZ-R7, 74AUP1GU04, 74AUP1G14 and 74LVC1G04. By type, the board carries 10 capacitors, 8 connectors, 8 resistors, 5 ICs and 1 crystal.
From the project
32kHz Low power crystal oscillator using 74AUP logic
The BOM for the oscillator portion of the design is below:
Designator | Description | Component | Cost 1k qty ------------ | -------------| ------------- | ------------- U4 | Schmitt Trigger Inv |SN74AUP1G14DCKR | $0.066 U2 | Unbuffered inverter | 74AUP1GU04GW,125 | $0.1059 U5 | Buffered inverter | SN74AUP1G04DCKR | $0.072 Y1 | through-hole xtal | TDXLF-206 32.768 | 0.0481 C5 | 0.1uF cap X7R 0402 | CC0402KRX7R9BB104 | $0.0031 C8 | 0.1uF cap X7R 0402 | CC0402KRX7R9BB104| $0.0031 C10 | 0.1uF cap X7R 0402| CC0402KRX7R9BB104| $0.0031 C9 | 10n cap X7R 0402 | CGA2B2X7R1E103KT0Y0F | $0.0069 R4 |…
Main components on the Clkbrd3
Clkbrd3 bill of materials (BOM)
34 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ADP1710AUJZ-R7 | TSOT-23-5 | U1, U3 |
| 1 | 74AUP1GU04 | SOT-353_SC-70-5 | U2 |
| 1 | 74AUP1G14 | SOT-353_SC-70-5 | U4 |
| 1 | 74LVC1G04 | SOT-353_SC-70-5 | U5 |
| 1 | Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | Barrel_Jack | BarrelJack_CUI_PJ-102AH_Horizontal | J1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J2 |
| 1 | pwr_input_select | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | 0.9v enable | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | vddio_header | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | clock output header | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_Coaxial | SMA_Amphenol_132289_EdgeMount | J7 |
| 1 | vxtal_header | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 2 | 50k | Potentiometer_Bourns_3314G_Vertical | RV1, RV2 |
| 4 | 1u | C_0402_1005Metric | C1, C2, C3, C7 |
| 2 | 22p | C_0402_1005Metric | C4, C6 |
| 3 | 0.1u | C_0402_1005Metric | C5, C8, C10 |
| 1 | 10n | C_0402_1005Metric | C9 |
| 2 | 59k | R_0402_1005Metric | R1, R8 |
| 2 | 10k | R_0402_1005Metric | R2, R3 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10M | R_0402_1005Metric | R4, R7 |
| 1 | 330k | R_0402_1005Metric | R5 |
| 1 | 0 | R_0402_1005Metric | R6 |
Clkbrd3 design files
The KiCad project lives in the jaycordaro/clkbrd3 repository on GitHub; these links point at the commit this page was built from.
- Layoutclkbrd3.kicad_pcb
Clkbrd3: common questions
How big is the Clkbrd3 PCB?
The Clkbrd3 measures 42.6 × 36.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Clkbrd3?
34 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Clkbrd3 design files?
From the jaycordaro/clkbrd3 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Clkbrd3 design in my own project?
Yes, under the terms of its BSD-2-Clause license, which jaycordaro chose for the repository.