27 open source boards using the 74LVC1G04
Real designs built with the 74LVC1G04, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Bcflight
dridri
66.3 × 40.2 mm56 parts4LGPL-3.0169MBRadioDual2
LadyRoninEngineer
97 × 79.5 mm99 parts2LUnlicense34FreeDSP-OCTAVIA
freeDSP
178 × 99 mm505 parts4LCC-BY-SA-4.019PIC
360-Lizard-RE
Pheeeeenom
72.8 × 43.1 mm93 parts2LGPL-3.011Csa ultracpu
fachat
160 × 100.2 mm175 parts4LGPL-3.09FreeDSP-G
freeDSP
170 × 101 mm367 parts4LCC0-1.06PMSM Driver
ssyps2
294 × 143.9 mm286 parts4LNo license5PIC
HL2-Companion board codec and-Filter-
bnamnaidu
100 × 100 mm192 parts2LNo license4AVR/Arduino
Exp control board
Coen-Lab
120.2 × 224.7 mm262 parts4LAGPL-3.03ESP8266
Soil Sensor Hub
ArtoLabs
98 × 91.1 mm74 parts2LMIT3RasPi4-UART-RS485
noriakinakagawa
65 × 56 mm46 parts2LCustom license3NoCIC
hkzlab
9.5 × 20.6 mm15 parts2LCC-BY-NC-4.02RP2040/RP2350
PiEBV
Low-Boom
126 × 126 mm82 parts4LGPL-3.01QSE-Filter
Greg-R
76.5 × 78.1 mm69 parts2LNo license1- schematic only · 64 partsSTM32
Rf mixed signal security game
jackpham-rgb
64 partsMIT1 ESP32
Vaporizer
itspolly
73.8 × 73.9 mm108 parts2LUnlicense0Midi controller pot board teensy
mppowell
287 × 135 mm62 parts2LNo license0AVR/Arduino
Invaders
anyahelene
127 × 88.9 mm53 parts2LNo license0Clkbrd3
jaycordaro
42.6 × 36.2 mm34 parts2LBSD-2-Clause0STM32
QIC02EMU
MattisLind
95.3 × 76.2 mm20 parts2LApache-2.00RAM adapter
trwgQ26xxx
78 × 66.5 mm14 parts2LCC-BY-NC-4.02Cft ctl
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06MicroDeflect
tullulah
100 × 100 mm94 parts2LGPL-3.03Atari 2600 Cartridge
f1ac0
41.3 × 45.7 mm10 parts2LNo license3Cft ctl dip
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06AVR/Arduino
Debugging Front Panel
alexiosc
280 × 164.6 mm165 parts2LGPL-3.06Flips6b
cawapy
90 × 50 mm19 parts2LNo license3
How designs wire the 74LVC1G04
Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the 74LVC1G04 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 14 of 24 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 100% | — |
| GNDpin 3 | Connected to: GND 100% | — |
| VCCpin 5 | Connected to: 3.3V 83% · a signal 17% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bcflight by dridri, MBRadioDual2 by LadyRoninEngineer, FreeDSP-OCTAVIA by freeDSP and 360-Lizard-RE by Pheeeeenom.
The 74LVC1G04 in open source designs
The gallery holds 27 open source boards using the 74LVC1G04 from 25 GitHub repositories; a typical one measures about 99 × 90 mm and carries around 82 components.
65% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Bcflight by dridri.
Parts used alongside the 74LVC1G04
Microcontrollers on boards using the 74LVC1G04
What boards using the 74LVC1G04 are built for
74LVC1G04: common questions
Where can I find a 74LVC1G04 reference design?
Each of the 27 boards on this page is a real design using the 74LVC1G04. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC1G04 VCC pin?
The VCC pin has a decoupling capacitor on 14 of 24 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 24 open source designs using the 74LVC1G04.
What parts are used alongside the 74LVC1G04?
The 74LVC1G08, 74LVC1G17, 74LVC1G86, AMS1117-3.3 and AP2112K-3.3 appear in the most repositories here.
Which microcontrollers do boards using the 74LVC1G04 use?
Most are built on AVR/Arduino (3), PIC (2), STM32 (2) and ESP32 (1).
How big is a typical board using the 74LVC1G04?
The median is 99 × 90 mm, and 65% are two-layer designs.
What is the most popular open source board using the 74LVC1G04?
By GitHub stars, Bcflight by dridri, with 169 stars.
Can I simulate one of these boards using the 74LVC1G04 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.