Open PWM Gyro

jerinabr·Open_PWM_Gyro

Open PWM Gyro PCB layout, top view — open source STM32 board by jerinabr

About the Open PWM Gyro PCB

Open PWM Gyro is an open source STM32 PCB design by jerinabr, published on GitHub. It is a 4-layer board measuring 32.5 × 22 mm, with 27 components from 17 distinct parts.

Its main chip is the STM32G431KBTX, from the STM32 family. Other key parts include the TCR2EF33_LMCT. By type, the board carries 12 capacitors, 5 resistors, 2 ICs, 2 connectors, 1 crystal and 1 switch.

It belongs with the sensors designs in this gallery.

From the project

PWM gyro for fixed wing RC planes. Meant to be connected to an ELRS RX or other RX that outputs CRSF control data.

Both ground layers are solid ground pours and aren't shown in the images section below

Open PWM Gyro, from the project README
From the project README

Main components on the Open PWM Gyro

Open PWM Gyro bill of materials (BOM)

27 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TCR2EF33_LMCT
U1
1
STM32G431KBTX
STM32G431KBTx
U2
1
CRYSTAL_GND24
Crystal_GND24
Y1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
CONN_01X21
Conn_01x21
J2
1
ICM-42605
MT1
1
SW_SPST
SW1
1
CONN_02X05_ODD_EVEN
Conn_02x05_Odd_Even
SWD1
1
LED_Dual_AKKA
LED1
1
PMEG2005CT,215
D1
7
0.1U
0.1u
C1, C5, C6, C7, C8, C9, C12
2
1u
C2, C4
1
22U
22u
C3
2
10P
10p
C10, C11
2
5K1
5k1
R1, R2
2
10K
10k
R3, R5
1
68
R4

Open PWM Gyro design files

The KiCad project lives in the jerinabr/Open_PWM_Gyro repository on GitHub; these links point at the commit this page was built from.

Open PWM Gyro: common questions

What microcontroller does the Open PWM Gyro use?

The Open PWM Gyro is built around the STM32G431KBTX, from the STM32 family.

How big is the Open PWM Gyro PCB?

The Open PWM Gyro measures 32.5 × 22 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Open PWM Gyro?

27 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Open PWM Gyro design files?

From the jerinabr/Open_PWM_Gyro repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Open PWM Gyro design in my own project?

The repository has no license, so all rights stay with jerinabr. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Open PWM Gyro without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards