MCLZ8
jeroenhn·zykl·KiCAD Project/Misc/MCLZ8_PCB.kicad_pcb
About the MCLZ8 PCB
MCLZ8 is an open source NXP PCB design by jeroenhn, published on GitHub. It is a 2-layer board measuring 41 × 62.6 mm, with 6 components from 3 distinct parts.
Its main chip is the Teensy4.1, from the NXP family. Other key parts include the SN74LVC573A and Z80CPU.
From the project
The ReZyklus Project is an open-source effort to recreate the original Zyklus MPS-1.
The ReZyklus Project is an open-source effort to recreate the original Zyklus MPS-1.
This repository contains everything required to build your own Zyklus MPS-1 clone, aptly named 'ReZyklus', including hardware design files, panel layouts, and supporting documentation.
See my blog for some more info on the project: https://www.zyklus-mps.com
There is a Discord server you can join specifically for this project: https://discord.gg/zFuuCRRDz4
Main components on the MCLZ8
MCLZ8 bill of materials (BOM)
6 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Teensy4.1 | Teensy41_Ted_Modified | U1 |
| 4 | SN74LVC573A | TSSOP-20_4.4x6.5mm_P0.65mm | U3, U4, U5, U7 |
| 1 | Z80CPU | DIP-40_W15.24mm | U6 |
MCLZ8 design files
The KiCad project lives in the jeroenhn/zykl repository on GitHub; these links point at the commit this page was built from.
MCLZ8: common questions
What microcontroller does the MCLZ8 use?
The MCLZ8 is built around the Teensy4.1, from the NXP family.
How big is the MCLZ8 PCB?
The MCLZ8 measures 41 × 62.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MCLZ8?
6 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MCLZ8 design files?
From the jeroenhn/zykl repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MCLZ8 design in my own project?
The repository has no license, so all rights stay with jeroenhn. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MCLZ8 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in zykl
ReZyklus Main Board
jeroenhn
473.6 × 192.5 mm265 parts2LNo license14ReZyklus Panel
jeroenhn
472.7 × 161.7 mm156 parts2LNo license14ReZyklus.memory cartridge
jeroenhn
73.7 × 45.1 mm48 parts2LNo license14ReZyklus.Z80BufferBoard
jeroenhn
69.2 × 64.1 mm36 parts2LNo license14ReZyklus.original memory cartridge
jeroenhn
104.1 × 71.1 mm21 parts2LNo license14ReZyklus MPS PSU
jeroenhn
129.3 × 123.2 mm20 parts2LNo license1413/01/2024 v1.0 First version
jeroenhn
186.1 × 35.6 mm9 parts2LNo license14ReZyklus - MIDI Board
jeroenhn
182.3 × 16.5 mm7 parts2LNo license14ReZyklus - SMPS PSU
jeroenhn
129.3 × 123.2 mm6 parts2LNo license14
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532