Powerstrip left

Jiggolino·Hexapod·PCB/powerstrip_left/powerstrip_left.kicad_pcb

Powerstrip left PCB layout, top view — open source board by Jiggolino

About the Powerstrip left PCB

Powerstrip left is an open source PCB design by Jiggolino, published on GitHub under the Custom license license. It is a 4-layer board measuring 37 × 100 mm, with 37 components from 16 distinct parts.

Other key parts include the PCA9685PW/Q900,118, MUX508IDR, INA181 and LT1117CST-3.3. By type, the board carries 14 capacitors, 9 connectors, 4 ICs, 1 diode and 1 resistor.

From the project

The files for the BüP Project of Linus Meier, still under construction

Main components on the Powerstrip left

PCA9685PW/Q900,118MUX508IDRINA181LT1117CST-3.3

Powerstrip left bill of materials (BOM)

37 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PCA9685PW/Q900,118
PCA9685PW_Q900,118
IC1
1
MUX508IDR
U1
1
INA181
U2
1
LT1117CST-3.3
U3
1
XT60PW-M
J1
3
CONN_01X06_PIN
Conn_01x06_Pin
J2, J3, J4
3
CONN_01X03_PIN
Conn_01x03_Pin
J5, J6, J7
1
CONN_01X08_PIN
Conn_01x08_Pin
J8
1
CONN_01X02_PIN
Conn_01x02_Pin
J9
8
R0.005
shunt_01, shunt_2, shunt_3, shunt_4, shunt_5, shunt_6, shunt_7, shunt_8
1
LED
D1
4
100N
100n
C1, C2, C12, C13
8
C_Polarized
C3, C4, C5, C6, C7, C8, C9, C10
1
1u
C14
1
10u Tantal
C15
1
R
R1

Powerstrip left design files

The KiCad project lives in the Jiggolino/Hexapod repository on GitHub; these links point at the commit this page was built from.

Powerstrip left: common questions

How big is the Powerstrip left PCB?

The Powerstrip left measures 37 × 100 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Powerstrip left?

37 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Powerstrip left design files?

From the Jiggolino/Hexapod repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Powerstrip left design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in Hexapod