DragonATXProtoLA
jimbro1000·DragonATXProtoLA
About the DragonATXProtoLA PCB
DragonATXProtoLA is an open source PCB design by jimbro1000, published on GitHub under the MIT license. It is a 2-layer board measuring 197 × 75.5 mm, with 8 components from 8 distinct parts.
It belongs with the test & measurement designs in this gallery.
From the project
Logic Analyser interface card for Dragon ATX Prototype backplane
This repository contains the KiCad project files to produce logic analyser interface board for my ATX Prototype backplane.
This design requires the ATX backplane board in order to operate See https://github.com/jimbro1000/DragonATXProto
The board requires the use of 5 Dr Gusman Pico analyser boards.
This design has been completed using KiCad 9. Earlier versions of KiCad are not compatible.

DragonATXProtoLA bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TTL1 | PinSocket_2x16_P2.54mm_Horizontal | J1 |
| 1 | LV1 | PinSocket_2x16_P2.54mm_Horizontal | J2 |
| 1 | LV2 | PinSocket_2x16_P2.54mm_Horizontal | J3 |
| 1 | TTL2 | PinSocket_2x16_P2.54mm_Horizontal | J4 |
| 1 | TTL3 | PinSocket_2x16_P2.54mm_Horizontal | J5 |
| 1 | Chain Front | PinSocket_1x02_P2.54mm_Horizontal | J6 |
| 1 | Chain Rear | PinSocket_1x02_P2.54mm_Horizontal | J7 |
| 1 | Slot1 | Card_Edge | PL1 |
DragonATXProtoLA design files
The KiCad project lives in the jimbro1000/DragonATXProtoLA repository on GitHub; these links point at the commit this page was built from.
- LayoutDragonATXProtoLA.kicad_pcb
- SchematicDragonATXProtoLA.kicad_sch
DragonATXProtoLA: common questions
How big is the DragonATXProtoLA PCB?
The DragonATXProtoLA measures 197 × 75.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DragonATXProtoLA?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the DragonATXProtoLA design files?
From the jimbro1000/DragonATXProtoLA repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DragonATXProtoLA design in my own project?
Yes, under the terms of its MIT license, which jimbro1000 chose for the repository.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528