Input channel
About the Input channel PCB
Input channel is an open source PCB design by jimpudar, published on GitHub. It is a 2-layer board measuring 23.2 × 38.4 mm, with 16 components from 12 distinct parts.
Other key parts include the TLV7031DBV and PC817. By type, the board carries 7 resistors, 4 capacitors, 2 ICs, 1 transistor and 1 connector.
Main components on the Input channel
Input channel bill of materials (BOM)
16 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV7031DBV | SOT-23-5_HandSoldering | U1 |
| 1 | PC817 | DIP-4_W7.62mm | U2 |
| 1 | BSS138 | SOT-23 | Q1 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | RFB-0505S | RFB0505S | PS1 |
| 2 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 1 | 470k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 33k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 500k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 2 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R6 |
| 2 | 330 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R7 |
Input channel design files
The KiCad project lives in the jimpudar/hil-input-board-kicad repository on GitHub; these links point at the commit this page was built from.
- Layoutinput_channel.kicad_pcb
- Schematicinput_channel.kicad_sch
Input channel: common questions
How big is the Input channel PCB?
The Input channel measures 23.2 × 38.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Input channel?
16 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Input channel design files?
From the jimpudar/hil-input-board-kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Input channel design in my own project?
The repository has no license, so all rights stay with jimpudar. Use it as a reference, and ask the author before reusing the design.
