282 open source boards using the PC817

Real designs built with the PC817, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

282 boardsClear filters|Most starred

How designs wire the PC817

Read from the KiCad layouts of 201 open source designs, one per repository: what each pin of the PC817 connects to, and the resistors, capacitors and other passives placed on it.

  • The IN pin has a series resistor on 136 of 201 designs, most often 1 kΩ (then 220 Ω).
INpin 1Connected to: Signal 93%
  • Series resistor on 68% · 1 kΩ (21), 220 Ω (20), 330 Ω (13)
NCpin 4Connected to: Signal 70% · 5V 25%
  • Pull-up to 3.3V on 30% · 10 kΩ (28), 1 kΩ (12), 4.7 kΩ (4)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Piano solenoid controller by CRImier, Bldc control ver3 by pekkaroi, Digirig shack by softcomplex and Biodata by QuinnFreedman.

The PC817 in open source designs

The gallery holds 282 open source boards using the PC817 from 210 GitHub repositories; a typical one measures about 98 × 83 mm and carries around 53 components.

87% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.

The most starred is Piano solenoid controller by CRImier.

Microcontrollers on boards using the PC817

PC817: common questions

Where can I find a PC817 reference design?

Each of the 282 boards on this page is a real design using the PC817. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the PC817 IN pin?

The IN pin has a series resistor on 136 of 201 designs, most often 1 kΩ (then 220 Ω). Counted from the KiCad layouts of 201 open source designs using the PC817.

What parts are used alongside the PC817?

The AMS1117-3.3, ESP32-WROOM-32, L7805, LM7805_TO220 and Arduino_Nano_v3.x appear in the most repositories here.

Which microcontrollers do boards using the PC817 use?

Most are built on ESP32 (86), AVR/Arduino (41), ESP8266 (17) and STM32 (12).

How big is a typical board using the PC817?

The median is 98 × 83 mm, and 87% are two-layer designs.

What is the most popular open source board using the PC817?

By GitHub stars, Piano solenoid controller by CRImier, with 254 stars.

Can I simulate one of these boards using the PC817 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part