RC-PT1
About the RC-PT1 PCB
RC-PT1 is an open source PCB design by jkordek1, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 6 components from 4 distinct parts.
By type, the board carries 4 test points, 1 capacitor and 1 resistor.
It belongs with the test & measurement designs in this gallery.
From the project
A collection of educational printed circuit boards (PCBs) developed for laboratory exercises in Automatic Control Systems. The project demonstrates the implementation of fundamental analog transfer functions using passive components and operational amplifiers.
A collection of educational printed circuit boards (PCBs) developed for laboratory exercises in Automatic Control Systems. The project demonstrates the implementation of fundamental analog transfer functions using passive components and operational amplifiers.
The boards are intended for university courses and provide a hands-on platform for studying the behavior of basic dynamic systems through practical experiments.
RC-PT1 bill of materials (BOM)
6 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TestPoint | DELTRON 4mm banana socket - red | TP1, TP3 |
| 2 | TestPoint | DELTRON 4mm banana socket - black | TP2, TP4 |
| 1 | C | C_Rect_L7.2mm_W5.0mm_P5.00mm | C1 |
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
RC-PT1 design files
The KiCad project lives in the jkordek1/Automatic-Control repository on GitHub; these links point at the commit this page was built from.
- LayoutRC-PT1/RC-PT1.kicad_pcb
- SchematicRC-PT1/RC-PT1.kicad_sch
- BOMRC-PT1/production/bom.csv
RC-PT1: common questions
How big is the RC-PT1 PCB?
The RC-PT1 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RC-PT1?
6 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RC-PT1 design files?
From the jkordek1/Automatic-Control repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RC-PT1 design in my own project?
The repository has no license, so all rights stay with jkordek1. Use it as a reference, and ask the author before reusing the design.
More boards in Automatic-Control
Similar boards
LevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
StackLink
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
AnalyzerBoxPCB fork
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
EleLab v2 Bus100
Chrismettal
100 × 100 mm37 parts2LGPL-3.0528
EleLab v2 Bus150
150 × 50 mm37 parts2LGPL-3.0528
EleLab v2 PowerFeed
68 × 50 mm11 parts2LGPL-3.0528