Mcu stm32h725

jlaustill·gdh-electric·modules/mcu-stm32h725/v0.0.1/mcu-stm32h725.kicad_pcb

Mcu stm32h725 PCB layout, top view — open source STM32 board by jlaustill

About the Mcu stm32h725 PCB

Mcu stm32h725 is an open source STM32 PCB design by jlaustill, published on GitHub under the CC0-1.0 license. It is a 4-layer board measuring 68.6 × 18 mm, with 38 components from 26 distinct parts.

Its main chip is the MCP2562FD-E/SN, from the STM32 family. Other key parts include the ESDCAN02-2BWY and GDT25-07-S1-RP. By type, the board carries 21 capacitors, 6 resistors, 4 ICs, 3 connectors, 3 inductors and 1 crystal.

Main components on the Mcu stm32h725

MCP2562FD-E/SNESDCAN02-2BWYGDT25-07-S1-RP

Mcu stm32h725 bill of materials (BOM)

38 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP2562FD-E/SN
USB6B1RL
MICROCHIP(美国微芯)
U1
1
ESDCAN02-2BWY
TLV62569DBVR
ST(意法半导体)
U2
1
GDT25-07-S1-RP
STM32H725RGV3
BOURNS
U3
1
GDT25-07-S1-RP
TPS2116DRLR
BOURNS
U4
1
25MHz
Y1
1
USB-C
J1
1
Side A
J2
1
Side B
J3
1
600R@100MHz
FB1
1
ACT1210-110-2P-TL00
2.2uH
TDK
L1
1
2.2uH
L2
1
100NF
4.7uF
YAGEO(国巨)
C1
1
100NF
10uF
YAGEO(国巨)
C2
1
47PF
220pF
Kyocera AVX
C3
1
47PF
10uF
Kyocera AVX
C4
1
10NF
22uF
KEMET(基美)
C5
10
100nF
C6, C7, C9, C11, C12, C13, C14, C17 +2
2
10uF
C8, C10
1
4.7uF
C15
1
1uF
C16
Show 6 more
QtyPartRefs
2
27pF
C19, C20
1
CRCW1206510KFKEA
453k
VISHAY(威世)
R1
1
CRCW1206510KFKEA
100k
VISHAY(威世)
R2
1
47k
R3
2
5.1k
R4, R5
1
10k
R6

Mcu stm32h725 design files

The KiCad project lives in the jlaustill/gdh-electric repository on GitHub; these links point at the commit this page was built from.

Mcu stm32h725: common questions

What microcontroller does the Mcu stm32h725 use?

The Mcu stm32h725 is built around the MCP2562FD-E/SN, from the STM32 family.

How big is the Mcu stm32h725 PCB?

The Mcu stm32h725 measures 68.6 × 18 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Mcu stm32h725?

38 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mcu stm32h725 design files?

From the jlaustill/gdh-electric repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mcu stm32h725 design in my own project?

Yes, under the terms of its CC0-1.0 license, which jlaustill chose for the repository.

Can I test firmware for the Mcu stm32h725 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards