10 open source boards using the MCP2562FD-E/SN

Real designs built with the MCP2562FD-E/SN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the MCP2562FD-E/SN

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the MCP2562FD-E/SN connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF.
  • The VIO pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF.
  • The CANH pin has a series resistor on 6 of 8 designs, most often 120 Ω (then 60 Ω).
  • The CANL pin has a series resistor on 5 of 8 designs, most often 120 Ω (then 60 Ω).
VSSpin 2Connected to: GND 88%
VDDpin 3Connected to: 5V 88%
  • Decoupling capacitor on 88% · 100 nF (7)
VIOpin 5Connected to: 3.3V 88%
  • Decoupling capacitor on 88% · 100 nF (7)
CANLpin 6Connected to: A connector 100%
  • Series resistor on 63% · 120 Ω (2), 60 Ω (2), 60.4 Ω (1)
CANHpin 7Connected to: A connector 100%
  • Series resistor on 75% · 120 Ω (4), 60 Ω (2)
STBYpin 8Connected to: GND 50% · a signal 38%
  • Resistor to GND on 38% · 10 kΩ (2), 0 Ω (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Main board v3 by BlueJayRacing, Sensor module by HasiKe, Mcu stm32h725 by jlaustill and CANFD-Breakout with-JST-PH3 by jonnylin22.

The MCP2562FD-E/SN in open source designs

The gallery holds 10 open source boards using the MCP2562FD-E/SN from 8 GitHub repositories; a typical one measures about 67.6 × 41 mm and carries around 48 components.

50% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is Sensor module by HasiKe.

Parts used alongside the MCP2562FD-E/SN

Microcontrollers on boards using the MCP2562FD-E/SN

What boards using the MCP2562FD-E/SN are built for

MCP2562FD-E/SN: common questions

Where can I find a MCP2562FD-E/SN reference design?

Each of the 10 boards on this page is a real design using the MCP2562FD-E/SN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MCP2562FD-E/SN VDD pin?

The VDD pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the MCP2562FD-E/SN.

What decoupling capacitors do designs use on the MCP2562FD-E/SN VIO pin?

The VIO pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the MCP2562FD-E/SN.

What resistor goes on the MCP2562FD-E/SN CANH pin?

The CANH pin has a series resistor on 6 of 8 designs, most often 120 Ω (then 60 Ω). Counted from the KiCad layouts of 8 open source designs using the MCP2562FD-E/SN.

Which microcontrollers do boards using the MCP2562FD-E/SN use?

Most are built on STM32 (4) and ESP32 (2).

How big is a typical board using the MCP2562FD-E/SN?

The median is 67.6 × 41 mm, and 50% are two-layer designs.

What is the most popular open source board using the MCP2562FD-E/SN?

By GitHub stars, Sensor module by HasiKe, with 0 stars.

Can I simulate one of these boards using the MCP2562FD-E/SN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part