CW312T-EFR32MG21-SOCKET
jmercerr·CW312T-EFR32MG21-SOCKET
About the CW312T-EFR32MG21-SOCKET PCB
CW312T-EFR32MG21-SOCKET is an open source Silicon Labs PCB design by jmercerr, published on GitHub. It is a 2-layer board measuring 58.7 × 53.7 mm, with 17 components from 7 distinct parts.
Its main chip is the 790-62032-101G, from the Silicon Labs family. By type, the board carries 8 capacitors, 4 jumpers, 2 resistors, 1 IC, 1 connector and 1 inductor.
From the project
design transfer project from cw308t to cw312t form for EFR32MG21-SOCKET target board
Main components on the CW312T-EFR32MG21-SOCKET
CW312T-EFR32MG21-SOCKET bill of materials (BOM)
17 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 790-62032-101G EFR32MG21A020F1024IM32-BR SENSATA | CONN_232-5205-01_3MM | U1 |
| 1 | 61300311121 1x3 straight header pins Würth Elektronik | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 4 | ~ | SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 1 | FBMH1608HM102-T IND_1K_0603 Taiyo Yuden | L_0603_1608Metric | L1 |
| 6 | CC0603KRX7R6BB104 CAP_100n_10V_0603 YAGEO | C_0603_1608Metric | C1, C3, C5, C6, C7, C8 |
| 2 | CC0603KPX7R6BB225 CAP_2u2_10V_0603 YAGEO | C_0603_1608Metric | C2, C4 |
| 2 | RC0603FR-0722RL RES_22R_0603 YAGEO | R_0603_1608Metric | R1, R2 |
CW312T-EFR32MG21-SOCKET design files
The KiCad project lives in the jmercerr/CW312T-EFR32MG21-SOCKET repository on GitHub; these links point at the commit this page was built from.
CW312T-EFR32MG21-SOCKET: common questions
What microcontroller does the CW312T-EFR32MG21-SOCKET use?
The CW312T-EFR32MG21-SOCKET is built around the 790-62032-101G, from the Silicon Labs family.
How big is the CW312T-EFR32MG21-SOCKET PCB?
The CW312T-EFR32MG21-SOCKET measures 58.7 × 53.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CW312T-EFR32MG21-SOCKET?
17 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the CW312T-EFR32MG21-SOCKET design files?
From the jmercerr/CW312T-EFR32MG21-SOCKET repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CW312T-EFR32MG21-SOCKET design in my own project?
The repository has no license, so all rights stay with jmercerr. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CW312T-EFR32MG21-SOCKET without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Silicon Labs firmware against it before you order a PCB.
Similar boards
Silicon Labs
Tomu hardware
im-tomu
13 × 9.4 mm11 parts2LCC-BY-SA-4.0365Silicon Labs
One key
ahtn
14.5 × 14.5 mm10 parts2LNo license96Silicon Labs
2key
ahtn
36.5 × 17.5 mm7 parts2LNo license96Silicon Labs
Ble soil moisture sensor
Miceuz
170 × 18 mm33 parts2LApache-2.033Silicon Labs
Ble soil moisture sensor pannel
Miceuz
170 × 36 mm29 parts2LApache-2.033Silicon Labs
Ym2413 dev
andete
115 × 45 mm146 parts2LNo license25