Pulse stretcher
jnedbal·pulse_stretcher
About the Pulse stretcher PCB
Pulse stretcher is an open source PCB design by jnedbal, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 71 × 64 mm, with 79 components from 32 distinct parts.
Other key parts include the MAX1735, MCP1824ST-33, MCP1824ST-25, MC100LVEL31 and SY100ELT21L. By type, the board carries 36 capacitors, 26 resistors, 10 ICs, 4 connectors, 2 diodes and 1 inductor.
From the project
Pulse stretcher converting >350 ps pulses to ~5ns pulses with 1.25V amplitude into 50Ohm load
Main components on the Pulse stretcher
Pulse stretcher bill of materials (BOM)
79 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX1735 | SOT-23-5 | U1 |
| 1 | MCP1824ST-33 | SOT-223-3_TabPin2 | U2 |
| 1 | MCP1824ST-25 | SOT-223-3_TabPin2 | U3 |
| 1 | MC100LVEL31 | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | SY100ELT21L | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | 74LVC1G240 | SOT-23-5 | U6 |
| 1 | 74LVC1G34 | SOT-23-5 | U7 |
| 3 | AUC2G04 | SOT-23-6_Handsoldering | U8, U9, U10 |
| 1 | 5VDC | BARREL_JACK | J1 |
| 3 | SMA | SMA_5.0mm | J2, J3, J4 |
| 1 | green | LED_D3.0mm | D1 |
| 1 | orange | LED_D3.0mm | D2 |
| 1 | 11uH | DR334A | L1 |
| 4 | 10uV | C_1206_3216Metric | C1, C2, C3, C4 |
| 11 | 10n | C_0402_1005Metric | C5, C12, C14, C15, C19, C21, C23, C25 +3 |
| 4 | 1uC | C_0603_1608Metric | C6, C7, C35, C36 |
| 3 | 4u7E | C_0805_2012Metric | C8, C9, C10 |
| 5 | 1n | C_0402_1005Metric | C11, C18, C28, C31, C34 |
| 7 | 100n | C_0603_1608Metric | C13, C16, C20, C24, C26, C29, C32 |
| 2 | 20p | C_0603_1608Metric | C17, C22 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1k0 | R_0603_1608Metric | R1, R10, R12 |
| 2 | 100R | R_0603_1608Metric | R2, R3 |
| 5 | 2k2 | R_0603_1608Metric | R4, R5, R8, R9, R26 |
| 1 | 47k | R_0603_1608Metric | R6 |
| 1 | 33k | R_0603_1608Metric | R7 |
| 1 | 3k0 | R_0603_1608Metric | R11 |
| 1 | 1k5 | R_0603_1608Metric | R13 |
| 2 | 49R9 | R_0603_1608Metric | R14, R15 |
| 1 | 200R | R_0603_1608Metric | R16 |
| 1 | 750R | R_0603_1608Metric | R17 |
| 2 | 27R | R_0603_1608Metric | R18, R19 |
| 6 | 300R | R_0402_1005Metric | R20, R21, R22, R23, R24, R25 |
Pulse stretcher design files
The KiCad project lives in the jnedbal/pulse_stretcher repository on GitHub; these links point at the commit this page was built from.
Pulse stretcher: common questions
How big is the Pulse stretcher PCB?
The Pulse stretcher measures 71 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pulse stretcher?
79 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pulse stretcher design files?
From the jnedbal/pulse_stretcher repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pulse stretcher design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which jnedbal chose for the repository.