Segway Bot V7
jntaimo·2.004-Segway·Segway V7/Segway V7.kicad_pcb
About the Segway Bot V7 PCB
Segway Bot V7 is an open source PCB design by jntaimo, published on GitHub. It is a 4-layer board measuring 153 × 48 mm, with 68 components from 35 distinct parts.
Other key parts include the C130026, C2070774, C2856802 and C2150194. By type, the board carries 7 resistors, 5 ICs, 4 connectors, 2 transistors, 2 fuses and 2 switches.
Main components on the Segway Bot V7
Segway Bot V7 bill of materials (BOM)
68 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C130026 TCA9548APWR | SOP65P640X120-24N | U2 |
| 1 | C2070774 TPS564208DDCT | SOT95P280X110-6N | U3 |
| 1 | C2856802 EYESPI | Hirose_FH12-18S-0.5SH_1x18-1MP_P0.50mm_Horizontal | U4 |
| 1 | C2150194 POWER_IN | DPAK85P972X240-8N | U5 |
| 1 | C2150194 MOTOR_PWR | DPAK85P972X240-8N | U6 |
| 1 | C154733 DMMT5401-7-F | SOT95P285X140-6N | Q1 |
| 1 | C144153 DMG2305UX-13 | SOT91P240X110-3N | Q2 |
| 1 | WS2812B LED | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | 3.3V | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | GND | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | UART | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | C250086 1000uF | CP_Elec_10x12.6 | C_LED1 |
| 1 | C39232 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C_i2C1 |
| 1 | C519981 0.1uF | C_0805_2012Metric | Cbst1 |
| 1 | C39232 10uF | C_1210_3225Metric | Cin1 |
| 2 | C65428 22uF | C_1210_3225Metric | Cout1, Cout2 |
| 1 | C265102 Encoder L | JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | E1 |
| 1 | C265102 Encoder R | JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | E2 |
| 1 | C355683 2A | Fuse_1206_3216Metric | F1 |
| 1 | C207007 20A | Fuse_1206_3216Metric | F2 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | C265082 10K | JST_PH_B3B-PH-SM4-TB_1x03-1MP_P2.00mm_Vertical | POT1, POT2, POT3, POT4 |
| 4 | C160390 Qwiic | JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | Qw1, Qw2, Qw3, Qw4 |
| 1 | C25924 8.2k | R_0402_1005Metric | RBAT1 |
| 1 | C4109 2k | R_0402_1005Metric | RBAT2 |
| 8 | C25756 15k | R_0402_1005Metric | RCs1, RCs2, RSE1, RSE2, R_MTR1, R_MTR2, R_PWR1, R_PWR2 |
| 12 | C144807 10k | R_0402_1005Metric | RSC0, RSC1, RSC2, RSC3, RSD0, RSD1, RSD2, RSD3 +4 |
| 1 | C25151 220Ω | R_0402_1005Metric | R_LED1 |
| 2 | C21190 1kΩ | R_0402_1005Metric | R_MOTOR1, R_PWR_LED1 |
| 1 | C25792 47K | R_0402_1005Metric | R_ZVD_2 |
| 1 | C183355 56.2k | R_0402_1005Metric | Rfbt1 |
| 2 | C160352 SW_PWR | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | SW1, SW2 |
| 1 | C434423 MOTOR_LED | LED_0603_1608Metric | D1 |
| 1 | C84263 Power LED | LED_0603_1608Metric | D2 |
| 1 | C845075 3.3uH | L_Vishay_IHLP-4040 | L1 |
| 7 | C144807 10K | R_0402_1005Metric | R1, R2, R3, R4, R7, R8, R9 |
Segway Bot V7 design files
The KiCad project lives in the jntaimo/2.004-Segway repository on GitHub; these links point at the commit this page was built from.
Segway Bot V7: common questions
How big is the Segway Bot V7 PCB?
The Segway Bot V7 measures 153 × 48 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Segway Bot V7?
68 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Segway Bot V7 design files?
From the jntaimo/2.004-Segway repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Segway Bot V7 design in my own project?
The repository has no license, so all rights stay with jntaimo. Use it as a reference, and ask the author before reusing the design.