HardLabs

Blvdtopsmd

joedinkle·eyeohdesigns·keyboards/theboulevard/pcb-files/top-pcb-smd-rgb/blvdtopsmd.kicad_pcb

Blvdtopsmd PCB layout, top view — open source board by joedinkle

About the Blvdtopsmd PCB

Blvdtopsmd is an open source PCB design by joedinkle, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 260 × 21.4 mm, with 13 components from 5 distinct parts.

By type, the board carries 5 diodes, 4 relays, 2 LEDs, 1 connector and 1 switch.

It belongs with the keyboards designs in this gallery.

From the project

Files for EOD keyboards

Directions for assembling the top PCB can be found here

If using plate foam and a 6.25u or 7u bar, I recommend removing this portion of the foam to ensure smooth operation of the spacebar.

Use screws that require an allen key for screwing the bottom case to the top case. All other screws are the same.

Blvdtopsmd bill of materials (BOM)

13 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Conn_01x12_Male
J1
4
KEYSW
K53, K54, K55, K56
1
RS-187R05A2-DSMTRT
Rotary_Encoder_Switch
SW1
2
WS2812B
LED1, LED2
5
D
D53, D54, D55, D56, D57

Blvdtopsmd design files

The KiCad project lives in the joedinkle/eyeohdesigns repository on GitHub; these links point at the commit this page was built from.

Blvdtopsmd: common questions

How big is the Blvdtopsmd PCB?

The Blvdtopsmd measures 260 × 21.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Blvdtopsmd?

13 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Blvdtopsmd design files?

From the joedinkle/eyeohdesigns repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Blvdtopsmd design in my own project?

Yes, under the terms of its GPL-3.0 license, which joedinkle chose for the repository.

More boards in eyeohdesigns

Similar boards