Touch Drum Built in Audio
About the Touch Drum Built in Audio PCB
Touch Drum Built in Audio is an open source NXP PCB design by JoelEB, published on GitHub. It is a 2-layer board measuring 91.4 × 97.8 mm, with 12 components from 3 distinct parts.
Its main chip is the TEENSY_3.2_FULL_PINS, from the NXP family. Other key parts include the Audio_Shield. By type, the board carries 10 test points and 2 ICs.
It belongs with the audio designs in this gallery.
From the project
A repo for all thing TouchDrum Related: hardware/software files, 3D files, etc.
Main components on the Touch Drum Built in Audio
Touch Drum Built in Audio bill of materials (BOM)
12 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TEENSY_3.2_FULL_PINS | TEENSY_3.1-3.2_FULL_PINS | U1 |
| 1 | Audio_Shield | TEENSY_3.1-3.2_FULL_PINS | U2 |
| 10 | TEST-POINT3X5 | PAD.LARGE | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +2 |
Touch Drum Built in Audio design files
The KiCad project lives in the JoelEB/Touch_Drum repository on GitHub; these links point at the commit this page was built from.
Touch Drum Built in Audio: common questions
What microcontroller does the Touch Drum Built in Audio use?
The Touch Drum Built in Audio is built around the TEENSY_3.2_FULL_PINS, from the NXP family.
How big is the Touch Drum Built in Audio PCB?
The Touch Drum Built in Audio measures 91.4 × 97.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Touch Drum Built in Audio?
12 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Touch Drum Built in Audio design files?
From the JoelEB/Touch_Drum repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Touch Drum Built in Audio design in my own project?
The repository has no license, so all rights stay with JoelEB. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Touch Drum Built in Audio without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in Touch_Drum
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532