DRL&VREF

JohnLezama·Four-Channel-EMG-Wearable-Forearm-Brace·Electronics/DRL&VREF/DRL&VREF.kicad_pcb

DRL&VREF PCB layout, top view — open source board by JohnLezama

About the DRL&VREF PCB

DRL&VREF is an open source PCB design by JohnLezama, published on GitHub. It is a 2-layer board measuring 26.1 × 19 mm, with 16 components from 7 distinct parts.

Other key parts include the OPA333xxDCK and TL072. By type, the board carries 9 resistors and 2 ICs.

It belongs with the wearables designs in this gallery.

From the project

Status: Functional four-channel acquisition prototype; grip classification and prosthetic control remain in development

Status: Functional four-channel acquisition prototype; grip classification and prosthetic control remain in development

Surface electromyography, or sEMG, measures the electrical activity associated with muscle contraction using electrodes placed on the skin. Many of the muscles responsible for hand movement are located in the forearm, making multi-channel forearm EMG a potential input for grip classification and prosthetic hand control.

DRL&VREF, from the project README
From the project README

Main components on the DRL&VREF

DRL&VREF bill of materials (BOM)

16 components, 7 distinct parts.

QtyPartRefs
1
OPA333xxDCK
U1
1
TL072
U2
3
c=GCM21B5C1H223FA16L
10uF, 22nF, .1uF
1
15k
15k
1
200k
200k
8
12k
R1, R2, R3, R4, R5, R6, R7, R8
1
75k
R10

DRL&VREF design files

The KiCad project lives in the JohnLezama/Four-Channel-EMG-Wearable-Forearm-Brace repository on GitHub; these links point at the commit this page was built from.

DRL&VREF: common questions

How big is the DRL&VREF PCB?

The DRL&VREF measures 26.1 × 19 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DRL&VREF?

16 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the DRL&VREF design files?

From the JohnLezama/Four-Channel-EMG-Wearable-Forearm-Brace repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DRL&VREF design in my own project?

The repository has no license, so all rights stay with JohnLezama. Use it as a reference, and ask the author before reusing the design.

More boards in Four-Channel-EMG-Wearable-Forearm-Brace

Similar boards